Additional information
Brand |
---|
Get free shipping for order over 500EGP
Optimised frequency response
Extreme low handling and wind noise
Excellent sound quality
Cardioid dynamic capsule
Rugged all-metal body Pick-up pattern:cardioid
Frequency Response:100Hz~10KHz
Sensitivity:0°~-52.4dB±3dB (0dB=1V/ubar at 1KHz)
Output Impedance:500Ω±30% at 1 KHz
Connector:3-pin XLR Connector
Dimensions:ø51 mm,length 258mm/approx.320g
4,250 EGPAdd to cart
• Transducer Principle: Back Electret Condenser
• Directivity Characteristic: Cardioid, stereo
• Frequency Response: 30Hz-16KHz
• Sensitivity: -44dB±3dB(0dB=1V/Pa at 1KHz)
• Max. Input SPL: 130dB(THD≤1.0% at 1KHz)
• Low Frequency Attenuation: 80Hz 10dB/octave
• Output Impedance: ≤200Ω
• Power Requirement: CR2032 3V button battery
• Net Weight: 115g
1,500 EGPAdd to cart
XLR connector
+48V phantom power
Records 24bit/48kHz wav audio
Easy-to-use menu and LCD display
Input audio control
Switchable low-cut filter
3.5mm headphone monitor output
Lightweight all-metal construction Recording Media:
micro SD card (64MB~2GB)
microSDHC card (4GB~32GB)
Recording/Playback Format:24/48kHz 16/24bit, mono/poly BWF
Recording/Playback Format:24/48kHz 16/24bit, mono/poly BWF
Input Connector:XLR jack (Female), 1GND;2HOT;3COLD
Mic Input Level:Selectable at -12dBu~+33dBu
Headphone Jack:1/8’’ (3.5mm)
Frequency Response:20Hz~22kHz +/-2dB
Distortion:0.05% (1kHz sine wave)
S/N ratio:92dB or higher
Battery Type:2x AA Battery (alkaline, NiMH or lithium)
Power Consumption:0.65W (Maximum)
Phantom Power:+48V
3,650 EGPAdd to cart
• Carrier Frequency:780-789MHZ
• Frequency Response:30Hz-15KHz
• Number of Channels:6
• Transmit Power:≤10dBm
• Receiving Sensitivity:S/N:12dB 3uV
• S/N Ratio:≥50dB
• Operating Range: >100m
• Transmitter and Receiver Power Supply: 2×1.5 AA Alkaline battery
3,600 EGPOut of Stock
Stereo lavalier microphone for DSLR camera, camcorder,smartphone and recorder
Improved sensitivity and signal to noise
3.5mm audio output
5m cable length
Powered by one CR1130 battery (included)
Foam windscreen is included Type: Condenser microphone
Polar Pattern: Cardioid
Frequency Range: 50Hz to 18KHz
Sensitivity: -32±3dB (0dB=1V/Pa,at 1KHz)
Signal to Noise Ratio: >75 dB SPL
Battery Type: One LR44 battery
Cable: 5m/16.5 ft
Weight: 58g
Output: 3.5mm audio output
1,750 EGPAdd to cart
Compatible with the receiver of SR-WM4C wireless system
Four switchable channels to keep you free from interference
Handheld design for recording applications like interview
The high-band VHF provides pure sound
Record audio up to 60 metes away with no obstacle
Real-time monitoring
Volume control wheel
Power provided by LR6/AA size alkaline battery Operating Frequencies:
Channel A Channel B Channel C Channel D
203.65MHz 207.75MHz 211.55MHz 215.35MHz
Transmitters:
Operating Frequencies: 203-216MHz
Modulation Frequency: Modulation
Signal to noise ratio: 70dB or more
Antenna: 1/8λ wire antenna
Voice delay: 12ms
Battery: LR6/AA size alkaline Battery (not included)
Battery Life: 5 hours
Audio input connector: none
Current Consumption: 150 mA
Dimensions: L100.5*W43*H35mm
Weight: 137g (4.8 oz) without battery
Receiver:
Operating Frequencies: 203-216MHz
Reception System: FM Superheterodyne
Reception Sensitivity: 2 µV for 30 dB S/N
Output Connector: 3.5 mm (1/8″) TRS
DC Input: 9V DC (center-positive)
Battery: LR6/AA size alkaline Battery (not included)
Current Consumption: 150 mA
Battery Life: 5 hours
Dimensions: 102 x 62.0 x 44.7
Antenna Length: 178mm
Weight: 80 g (2.8 oz) without battery
2,400 EGPAdd to cart
• Transducer Principle: Back electret condenser
• Polar Pattern: Cardioid/Hypercardioid
• Frequency Response: 50Hz-16kHz/80Hz-14kHz
• Sensitivity: -45dB±3dB/-30dB±3dB
• Output Impedance: 500Q/1600Q ±30% (at 1 kHz)
• Load Impedance:≥1000Q
• Power Requirement: 1.5V AA battery or 9-52V phantom power
• Frequency Response Graph
2,000 EGPAdd to cart
• Transducer Principle: Back Electret Condenser
• Directivity Characteristic: Hyper-cardioid
• Frequency Response: 40Hz-16kHz
• Sensitivity: -36dB±3dB (0dB=1V/Pa at 1kHz)
• Output Impedance: 100Ω±30% (at 1kHz)
• Equivalent Noise Level: ≤26dB A (IEC 581-5)
• Max. Input SPL: 130dB (THD ≤1.0% at 1kHz)
• Bass Filter: 10dB/octave at 80Hz
• Power Requirements: 9-52V DC Phantom Power
1,450 EGPAdd to cart
Two pro-standard XLR terminals
Two real time audio level controls
LINE/MIC/48V PH switches
There level gain controls (0dB, 10dB, 20dB)
Standard cold shoe mount
Low cut switch (150Hz)
LED Indicator input Connections: 2 x XLR balanced – Mic/Line
(included SR-NV5 microphone takes up 1 input, if used)
Output Connection: 1 x 1/8″ (3.5 mm) wired connector
Power Requirements: 9 V alkaline or lithium battery
Frequency Response: 20 Hz to 20 Khz, +/-0.5 dB
THD: Less than 0.01% @ 1 kHz, -30 dBu input
SNR: 80 dB @ 1 kHz, -30 dBu input
Dimensions: XLR adapter (WxHxD)
3.31’’ x 3.94’’ x 3.27″ (84 x 100 x 83 mm)
Weight: XLR adapter: 5.9 oz (167g)
3,250 EGPOut of Stock
Reliable, broadcast-quality audio
514 MHz – 596 MHz
96 selectable channels in 2 groups
Headphone monitoring
Easy-to-read LCD displays
Over 330-feet (100m) in open areas or 200-feet (60m) with obstacles
Optional body-pack and XLR transmitters for different applications Transmitter
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Frequency Range: 514 MHz – 596 MHz
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Signal to Noise Ratio: 70 dB or more
Spur Suppression: -60 dB
Voice Delay: 12 ms
Antenna: 1/4λ wire antenna
Audio input connector: TX9:3.5mm mini jack
HU9: noneTX-XLR9: XLR-3-11C type (female)
Reference audio input level: -60dBV (MIC input, 0dB attenuation)
Distortion: 0.5% or less
Weight: TX9: Approx. 211.4g (excluding batteries)
HU9: Approx. 338.2g (excluding batteries)
TX-XLR9: Approx. 138g (Excluding batteries)
Battery: Two AA size batteries
Dimensions: TX9: 170.9 x 63.5 x 30.0 mm
HU9: 254.0 x 52.0 x 52.0 mm
TX-XLR9: 105.5 x 43 x 34.7 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃
Receiver
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Audio output connector: 3.5mm mini jack
Antenna: 1/4λ wire antenna
Audio output level: -60dBV
Headphone output level: 30mW (16Ω)
Receiver frequencies: 514 MHz – 596 MHz
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Frequency response: 40Hz to 18kHz (+/-3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Weight: 218.7g (Excluding batteries)
Battery: Two AA size batteries
Dimensions: 170.9 x 63.5 x 30.0 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃
13,200 EGPAdd to cart
© All copyrights reserved. Developed by Swarms Agency