Additional information
Brand |
---|
Get free shipping for order over 500EGP
Stereo lavalier microphone for DSLR camera, camcorder,smartphone and recorder
Improved sensitivity and signal to noise
3.5mm audio output
5m cable length
Powered by one CR1130 battery (included)
Foam windscreen is included Type: Condenser microphone
Polar Pattern: Cardioid
Frequency Range: 50Hz to 18KHz
Sensitivity: -32±3dB (0dB=1V/Pa,at 1KHz)
Signal to Noise Ratio: >75 dB SPL
Battery Type: One LR44 battery
Cable: 5m/16.5 ft
Weight: 58g
Output: 3.5mm audio output
1,750 EGPAdd to cart
Two Independent Channels
Two XLR Microphone Inputs
Two 3.5mm (TRS) Microphone Inputs
Two 1/4″ Guitar Inputs
Output switch for smartphone (TRRS) or Camera/Camcorder/Recorder (TRS)
3.5mm Headphone Output Jack for Monitoring
+48v Phantom Power Switch
Mono/Stereo Toggle Output Switch Frequency Response:20 Hz to 20 Khz (+/-0.5 dB)
THD:Less than 0.01% @ 1 kHz, -30 dBu input
SNR:80 dB @ 1 kHz, -30 dBu input
Input1:
1x XLR mic input
1 x 1/4″ (6.35mm) guitar input
1 x 1/8″ (3.5mm) input
Input2:
1 x XLR mic input
1 x 1/4″ (6.35mm) guitar input
1 x 1/8″ (3.5mm) input
Output:1 x 1/8″ (3.5mm) CAB LINE
Gain:+20 dB to Infinity
Phantom Power:48V power supplie
Power Requirements:9V alkaline or lithium battery
Dimensions:L 4.7″ x W 1.6″ x H 1.6″ (12 x 4 x 4 cm)
Weight:4.6 oz. (130g) (excluding battery)
2,600 EGPAdd to cart
• Element: Back Electret Condenser
• Polar Pattern: Hyper-cardioid
• Frequency Response: 60Hz-16kHz
• Sensitivity: -36dB±3dB (0dB=1V/Pa at 1kHz)
• Bass Filter: 12dB/octave at 100Hz
• Output Impedance: 200Ω±30% (at 1kHz)
• Power Requirements: 9-52V Phantom Power
1,300 EGPAdd to cart
Two pro-standard XLR terminals
Two real time audio level controls
LINE/MIC/48V PH switches
There level gain controls (0dB, 10dB, 20dB)
Standard cold shoe mount
Low cut switch (150Hz)
LED Indicator input Connections: 2 x XLR balanced – Mic/Line
(included SR-NV5 microphone takes up 1 input, if used)
Output Connection: 1 x 1/8″ (3.5 mm) wired connector
Power Requirements: 9 V alkaline or lithium battery
Frequency Response: 20 Hz to 20 Khz, +/-0.5 dB
THD: Less than 0.01% @ 1 kHz, -30 dBu input
SNR: 80 dB @ 1 kHz, -30 dBu input
Dimensions: XLR adapter (WxHxD)
3.31’’ x 3.94’’ x 3.27″ (84 x 100 x 83 mm)
Weight: XLR adapter: 5.9 oz (167g)
3,250 EGPOut of Stock
• Transducer Principle: Back Electret Condenser
• Directivity Characteristic: Cardioid
• Frequency Response: 50Hz-18kHz
• Sensitivity: -45dB±3dB (0dB=1V/Pa at 1kHz)
• Output Impedance: 1000Ω±30% (at 1kHz)
• Max. Input SPL: 136dB (THD ≤1.0% at 1kHz)
• Power Requirements: 1.5V AA Battery
• Net Weight: 258g
2,150 EGPAdd to cart
• Transducer Principle: Back Electret Condenser
• Directivity Characteristic: Hyper-cardioid
• Frequency Response: 40Hz-16kHz
• Sensitivity: -36dB±3dB (0dB=1V/Pa at 1kHz)
• Output Impedance: 100Ω±30% (at 1kHz)
• Equivalent Noise Level: ≤26dB A (IEC 581-5)
• Max. Input SPL: 130dB (THD ≤1.0% at 1kHz)
• Bass Filter: 10dB/octave at 80Hz
• Power Requirements: 9-52V DC Phantom Power
1,450 EGPAdd to cart
XLR connector
+48V phantom power
Records 24bit/48kHz wav audio
Easy-to-use menu and LCD display
Input audio control
Switchable low-cut filter
3.5mm headphone monitor output
Lightweight all-metal construction Recording Media:
micro SD card (64MB~2GB)
microSDHC card (4GB~32GB)
Recording/Playback Format:24/48kHz 16/24bit, mono/poly BWF
Recording/Playback Format:24/48kHz 16/24bit, mono/poly BWF
Input Connector:XLR jack (Female), 1GND;2HOT;3COLD
Mic Input Level:Selectable at -12dBu~+33dBu
Headphone Jack:1/8’’ (3.5mm)
Frequency Response:20Hz~22kHz +/-2dB
Distortion:0.05% (1kHz sine wave)
S/N ratio:92dB or higher
Battery Type:2x AA Battery (alkaline, NiMH or lithium)
Power Consumption:0.65W (Maximum)
Phantom Power:+48V
3,650 EGPAdd to cart
© All copyrights reserved. Developed by Swarms Agency