SARAMONIC WM4C M1

Optimised frequency response
Extreme low handling and wind noise
Excellent sound quality
Cardioid dynamic capsule
Rugged all-metal body Pick-up pattern:cardioid

Frequency Response:100Hz~10KHz

Sensitivity:0°~-52.4dB±3dB (0dB=1V/ubar at 1KHz)

Output Impedance:500Ω±30% at 1 KHz

Connector:3-pin XLR Connector

Dimensions:ø51 mm,length 258mm/approx.320g

Directional 90° mic capsule
Integrated shock-mount
Limits Background Noise
Foam Windscreen Included Type:Condenser microphones

Connector:TRRS (3.5mm jack) for iOS and Mac

Frequency Response:35 Hz to 18 kHz

Signal to Noise Ratio:74dB SPL

Dimensions:2.8 x 0.6 x 0.5 inches

Weight:21g (0.74oz)

• Output to both DSLR camera and smartphone
• 3.5mm TRS & TRRS output cables included
• Integrated shock mount
• Plug & Use Design
• Foam windscreen included
• Rugged alluminum alloy construction for main body Model :Vmic Mini

Type:14mm Unidirectional Condenser Microphone

Frequency Range :75Hz to 20kHz

Sensitivity:-35dB +/- 3dB (0dB=1V/Pa, at 1 KHz)

Maximum input S.P.L:f=1 kHz, THD<5% (105 dB)Output Impedance :200 ohmSignal to Noise Ratio:75 dB SPLPower :Plug-in powerDimensions:62 × 117 × 19mmWeight:69g (about 2.4oz)

Improves audio quality of smart phone
Two 1/8’’ (3.5mm) stereo mic/line inputs
One mini XLR microphone input (a mini-XLR to standard-XLR cable included)
+48V phantom power
One 1/8’’ (3.5mm) stereo line output to phone
One 1/8’’ (3.5mm) headphone monitor output
PLAY/REC monitor switch
Independent L/R level meters
Volume control knob
Includes two plug-in power condenser microphones
Includes a device holder and aluminum hand grip
Power provided by 9V battery Frequency Response: 20 Hz to 20 Khz, +/-0.5 dB
SNR: 82 dB @ 1 kHz, -30 dBu input

Distortion: Less than 0.03% @ 1 kHz, -30 dBu input

INPUT 1 GAIN: 15 dB

INPUT 2 GAIN & MINI XLR Jack: 15 dB

INPUT 1 & INPUT 2 Power: 5V power supplies

MINI Jack Phantom Power: 48V power supplies

VU Meter: -18 dB to +3 dB in 3 dB increments

Power Requirements: 9V alkaline or lithium battery

Dimensions: L 95 x W35 x H298 mm

Weight: 0.74 kg (26.1 oz.)

Two 1/8″ (3.5 mm) mono inputs One stereo input
Two XLR Inputs
One 1/8 (3.5 mm) stereo output
Mono/Stereo switch (M/S)
Left and Right Channel Control Knobs
Independent phantom power control for inputs. INPUT 1: 5V/OFF/3V; INPUT 2: 48V/OFF
LINE/MIC/PH switch
Level Meter Indicates the sound level in dB for each channel
Headphone jack to monitor the audio from microphones Frequency Response:20 Hz to 20 Khz, +/-0.5 dB

THD:Less than 0.01% @ 1 kHz, -30 dBu input

SNR:80 dB @ 1 kHz, -30 dBu input

INPUT1 GAIN:

LINE: 0 dB

MIC/PH: 20dB

INPUT2 GAIN

LINE: 0 dB

MIC/PH: 20dB

INPUT 1 Phantom Power:5V/3V power supplies

INPUT 2 Phantom Power:48V power supplies

Level Meter:-18 dB to +3 dB in 3 dB increments

Power Requirements:9 V alkaline or lithium battery

Battery Duration:

5 hours typical lithium battery (no phantom)

3 hour typical lithium battery (with phantom)

Dimensions:

(L x W x H) 136 mm x 80.5 mm x 62.5 mm

Weight:13.5 oz (0.385 kg)

Cardioid broadcast sound quality
1400 mAh internal rechargeable lithium battery
Balanced output
+48V phantom power
High frequency boost button
High pass filter (150 Hz)
Signal to noise ratio:75 dB SPL (per IEC651)
-10 dB PAD button Acoustic Principle:Line gradient
Directional Pattern:Cardioid

Frequency Range:40 to 20k Hz (selectable HPF 150 Hz)

Sensitivity:-35±3dB(0dB=1V/Pa,at 1KHz) 1.5V 2.2kΩ

Output Impedance:200 ohm

Maximum Output:10 dBu (at 1 kHz, 1% THD into 1 kOhm)

Dynamic Range:119 dB (per IEC651)

Maximum SPL:135 dB

Signal to Noise Ratio:75 dB SPL (per IEC651)

Power:48V phantom power;

built-in lithium battery;

(battery life:150 hours)

Output Connection;

3-pin XLR

balanced output between Pin 2 (+)

Pin 3 (-) and Pin 1 (ground)

Dimensions:2.3 x 2.3 x 28.2 cm

Weight:171g (About 6 oz.)

Maximum SPL:135 dB

Stereo lavalier microphone for DSLR camera, camcorder,smartphone and recorder
Improved sensitivity and signal to noise
3.5mm audio output
5m cable length
Powered by one CR1130 battery (included)
Foam windscreen is included Type: Condenser microphone
Polar Pattern: Cardioid

Frequency Range: 50Hz to 18KHz

Sensitivity: -32±3dB (0dB=1V/Pa,at 1KHz)

Signal to Noise Ratio: >75 dB SPL

Battery Type: One LR44 battery

Cable: 5m/16.5 ft

Weight: 58g

Output: 3.5mm audio output

XLR connector
+48V phantom power
Records 24bit/48kHz wav audio
Easy-to-use menu and LCD display
Input audio control
Switchable low-cut filter
3.5mm headphone monitor output
Lightweight all-metal construction Recording Media:

micro SD card (64MB~2GB)

microSDHC card (4GB~32GB)

Recording/Playback Format:24/48kHz 16/24bit, mono/poly BWF

Recording/Playback Format:24/48kHz 16/24bit, mono/poly BWF

Input Connector:XLR jack (Female), 1GND;2HOT;3COLD

Mic Input Level:Selectable at -12dBu~+33dBu

Headphone Jack:1/8’’ (3.5mm)

Frequency Response:20Hz~22kHz +/-2dB

Distortion:0.05% (1kHz sine wave)

S/N ratio:92dB or higher

Battery Type:2x AA Battery (alkaline, NiMH or lithium)

Power Consumption:0.65W (Maximum)

Phantom Power:+48V