• Transducer Principle: Back Electret Condenser
• Directivity Characteristic: Hyper-cardioid
• Frequency Response: 40Hz-16kHz
• Sensitivity: -36dB±3dB (0dB=1V/Pa at 1kHz)
• Output Impedance: 100Ω±30% (at 1kHz)
• Equivalent Noise Level: ≤26dB A (IEC 581-5)
• Max. Input SPL: 130dB (THD ≤1.0％ at 1kHz)
• Bass Filter: 10dB/octave at 80Hz
• Power Requirements: 9-52V DC Phantom Power
| Brand |
|---|
Two pro-standard XLR terminals
Two real time audio level controls
LINE/MIC/48V PH switches
There level gain controls (0dB, 10dB, 20dB)
Standard cold shoe mount
Low cut switch (150Hz)
LED Indicator input Connections: 2 x XLR balanced – Mic/Line
(included SR-NV5 microphone takes up 1 input, if used)
Output Connection: 1 x 1/8″ (3.5 mm) wired connector
Power Requirements: 9 V alkaline or lithium battery
Frequency Response: 20 Hz to 20 Khz, +/-0.5 dB
THD: Less than 0.01% @ 1 kHz, -30 dBu input
SNR: 80 dB @ 1 kHz, -30 dBu input
Dimensions: XLR adapter (WxHxD)
3.31’’ x 3.94’’ x 3.27″ (84 x 100 x 83 mm)
Weight: XLR adapter: 5.9 oz (167g)
Inputs:
One 1/8″ (3.5 mm) Auxiliary Mini-Jack Input
Two balanced XLR inputs
Output:
One stereo 1/8″ (3.5 mm) Mini-Jack Output
Dual Trim Control Knobs:
Adjust the signal of each channel to the optimum recording level
Mono /Stereo Switch:
LINE / MIC Switch:
GND1/GND2 Ground switch eliminate ground hum and noise
No Powe or Battery is Needed Input Level:
MIC：-35 dBu
LINE：-10 – +4 dBu
Input Level:General Mic Levels
Frequency Response:10Hz to 100kHz (+/-1.5 dB)
Dimensions:87 (L) x 80(W) x 52(H) mm
Weight:191g (6.7oz.)
• Transducer Principle: Back electret condenser
• Polar Pattern: Cardioid/Hypercardioid
• Frequency Response: 50Hz-16kHz/80Hz-14kHz
• Sensitivity: -45dB±3dB/-30dB±3dB
• Output Impedance: 500Q/1600Q ±30% (at 1 kHz)
• Load Impedance:≥1000Q
• Power Requirement: 1.5V AA battery or 9-52V phantom power
• Frequency Response Graph
Improves audio quality of smart phone
Two 1/8’’ (3.5mm) stereo mic/line inputs
One mini XLR microphone input (a mini-XLR to standard-XLR cable included)
+48V phantom power
One 1/8’’ (3.5mm) stereo line output to phone
One 1/8’’ (3.5mm) headphone monitor output
PLAY/REC monitor switch
Independent L/R level meters
Volume control knob
Includes two plug-in power condenser microphones
Includes a device holder and aluminum hand grip
Power provided by 9V battery Frequency Response: 20 Hz to 20 Khz, +/-0.5 dB
SNR: 82 dB @ 1 kHz, -30 dBu input
Distortion: Less than 0.03% @ 1 kHz, -30 dBu input
INPUT 1 GAIN: 15 dB
INPUT 2 GAIN & MINI XLR Jack: 15 dB
INPUT 1 & INPUT 2 Power: 5V power supplies
MINI Jack Phantom Power: 48V power supplies
VU Meter: -18 dB to +3 dB in 3 dB increments
Power Requirements: 9V alkaline or lithium battery
Dimensions: L 95 x W35 x H298 mm
Weight: 0.74 kg (26.1 oz.)
Reliable, broadcast-quality audio
514 MHz – 596 MHz
96 selectable channels in 2 groups
Headphone monitoring
Easy-to-read LCD displays
Over 330-feet (100m) in open areas or 200-feet (60m) with obstacles
Optional body-pack and XLR transmitters for different applications Transmitter
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Frequency Range: 514 MHz – 596 MHz
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Signal to Noise Ratio: 70 dB or more
Spur Suppression: -60 dB
Voice Delay: 12 ms
Antenna: 1/4λ wire antenna
Audio input connector: TX9:3.5mm mini jack
HU9: noneTX-XLR9: XLR-3-11C type (female)
Reference audio input level: -60dBV (MIC input, 0dB attenuation)
Distortion: 0.5% or less
Weight: TX9: Approx. 211.4g (excluding batteries)
HU9: Approx. 338.2g (excluding batteries)
TX-XLR9: Approx. 138g (Excluding batteries)
Battery: Two AA size batteries
Dimensions: TX9: 170.9 x 63.5 x 30.0 mm
HU9: 254.0 x 52.0 x 52.0 mm
TX-XLR9: 105.5 x 43 x 34.7 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃
Receiver
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Audio output connector: 3.5mm mini jack
Antenna: 1/4λ wire antenna
Audio output level: -60dBV
Headphone output level: 30mW (16Ω)
Receiver frequencies: 514 MHz – 596 MHz
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Frequency response: 40Hz to 18kHz (+/-3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Weight: 218.7g (Excluding batteries)
Battery: Two AA size batteries
Dimensions: 170.9 x 63.5 x 30.0 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃
Reliable, broadcast-quality audio
514 MHz – 596 MHz
96 selectable channels in 2 groups
Headphone monitoring
Easy-to-read LCD displays
Over 330-feet (100m) in open areas or 200-feet (60m) with obstacles
Optional body-pack and XLR transmitters for different applications Transmitter
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Frequency Range: 514 MHz – 596 MHz
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Signal to Noise Ratio: 70 dB or more
Spur Suppression: -60 dB
Voice Delay: 12 ms
Antenna: 1/4λ wire antenna
Audio input connector: TX9:3.5mm mini jack
HU9: noneTX-XLR9: XLR-3-11C type (female)
Reference audio input level: -60dBV (MIC input, 0dB attenuation)
Distortion: 0.5% or less
Weight: TX9: Approx. 211.4g (excluding batteries)
HU9: Approx. 338.2g (excluding batteries)
TX-XLR9: Approx. 138g (Excluding batteries)
Battery: Two AA size batteries
Dimensions: TX9: 170.9 x 63.5 x 30.0 mm
HU9: 254.0 x 52.0 x 52.0 mm
TX-XLR9: 105.5 x 43 x 34.7 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃
Receiver
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Audio output connector: 3.5mm mini jack
Antenna: 1/4λ wire antenna
Audio output level: -60dBV
Headphone output level: 30mW (16Ω)
Receiver frequencies: 514 MHz – 596 MHz
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Frequency response: 40Hz to 18kHz (+/-3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Weight: 218.7g (Excluding batteries)
Battery: Two AA size batteries
Dimensions: 170.9 x 63.5 x 30.0 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃
Two pro-standard XLR terminals
Two real time audio level controls
LINE/MIC/48V PH switches
Three level gain controls (0dB, 10dB, 20dB)
Sandard cold shoe mount
Low cut switch (150Hz) Inputs:2x Balanced XLR inputs
Output:3.5mm TRS (for Cameras & Camcorders)
Power Requirements:9V Battery
Frequency Response：20 Hz to 20 kHz, +/-0.5 dB
SNR：80 dB @ 1 kHz, -30 dBu input
Dimensions (WxHxD)
XLR Adapter: 3.3 x 3.9 x 3.3″ (84 x 100 x 83mm)
Microphone: 1.7 x 7.4″ (43 x 187mm)
Weight：
XLR Adapter: 5.9 oz (167g)
Microphone: 2.1 oz (60g)
2 Sherif Street, Downtown, Cairo, Egypt.
Family Mall, First District, Behind “Arafa Group”, 6 October City.
© All copyrights reserved. Developed by Swarms Agency
