SARAMONIC SR MIC HM4C (HAND)

Inputs:
One 1/8″ (3.5 mm) Auxiliary Mini-Jack Input
Two balanced XLR inputs
Output:
One stereo 1/8″ (3.5 mm) Mini-Jack Output
Dual Trim Control Knobs:
Adjust the signal of each channel to the optimum recording level
Mono /Stereo Switch:
LINE / MIC Switch:
GND1/GND2 Ground switch eliminate ground hum and noise
No Powe or Battery is Needed Input Level:
MIC：-35 dBu

LINE：-10 – +4 dBu

Input Level:General Mic Levels

Frequency Response:10Hz to 100kHz (+/-1.5 dB)

Dimensions:87 (L) x 80(W) x 52(H) mm

Weight:191g (6.7oz.)

Reliable, broadcast-quality audio
514 MHz – 596 MHz
96 selectable channels in 2 groups
Headphone monitoring
Easy-to-read LCD displays
Over 330-feet (100m) in open areas or 200-feet (60m) with obstacles
Optional body-pack and XLR transmitters for different applications Transmitter
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Frequency Range: 514 MHz – 596 MHz
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Signal to Noise Ratio: 70 dB or more
Spur Suppression: -60 dB
Voice Delay: 12 ms
Antenna: 1/4λ wire antenna
Audio input connector: TX9:3.5mm mini jack
HU9: noneTX-XLR9: XLR-3-11C type (female)
Reference audio input level: -60dBV (MIC input, 0dB attenuation)
Distortion: 0.5% or less
Weight: TX9: Approx. 211.4g (excluding batteries)
HU9: Approx. 338.2g (excluding batteries)

TX-XLR9: Approx. 138g (Excluding batteries)

Battery: Two AA size batteries
Dimensions: TX9: 170.9 x 63.5 x 30.0 mm
HU9: 254.0 x 52.0 x 52.0 mm
TX-XLR9: 105.5 x 43 x 34.7 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃
Receiver
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Audio output connector: 3.5mm mini jack
Antenna: 1/4λ wire antenna
Audio output level: -60dBV
Headphone output level: 30mW (16Ω)
Receiver frequencies: 514 MHz – 596 MHz
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Frequency response: 40Hz to 18kHz (+/-3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Weight: 218.7g (Excluding batteries)
Battery: Two AA size batteries
Dimensions: 170.9 x 63.5 x 30.0 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃

Two balanced XLR inputs One monitor input jack
One stereo 1/8″ (3.5 mm) mini-jack output
Left and Right control knobs allows you to adjust the signal of each channel to the optimum recording levels
M/S Switch select mono or stereo output mode
LINE / MIC/ PH Switches
PH 12V/OFF/48V Switch
Level Meter indicates the sound level in dB for each channel
The LED signal indicators flash red for overload
Gain switch selects LOW for unity gain or HIGH for +20dB boost in sound level
Headphone jack to monitor the audio from microphones or camera
AGC ON/OFF Switch —Auto Gain Control will increase the gain to maximum level, the AGC Disable function reduces the hiss when the camera is recording during quiet moments
GND1/GND2 Dual-mode grounding switch
Dual Headphone Jacks allow you to monitor the audio from the adapter at the input and output points Maximum Input Levels：

MIC 0 dB on the Level meter at -44 dBu input

LINE 0 dB on the Level meter at +10 dBu input

Output Level:Nominal MIC levels

Frequency Response:20 Hz to 20 kHz (+/- 0.5 dB)

THD:Less than 0.01% @ 1kHz, -30dBu input

S/N Ratio:85 dB @ 1 Khz, -30 dBu input

Gain:

LO gain: 0 dB

HI gain: 20 dB

Phantom Power:

Dual regulated 12 or 48 volt power supplies

Current to 14 mA (direct short)

Level meter:

-18 to +3 dB in 3 dB increments

Battery Type:One 9 volt alkaline or lithium battery

Battery Duration:

3 hours typical with alkaline battery (no phantom)

8 hours typical with lithium battery (no phantom)

Dimensions:

(L x W x H) 155 mm x 98 mm x 64 mm

Weight:21.1 oz (0.599 kg)

Optimised frequency response
Extreme low handling and wind noise
Excellent sound quality
Cardioid dynamic capsule
Rugged all-metal body Pick-up pattern:cardioid

Frequency Response:100Hz~10KHz

Sensitivity:0°~-52.4dB±3dB (0dB=1V/ubar at 1KHz)

Output Impedance:500Ω±30% at 1 KHz

Connector:3-pin XLR Connector

Dimensions:ø51 mm,length 258mm/approx.320g

• Output to both DSLR camera and smartphone
• 3.5mm TRS & TRRS output cables included
• Integrated shock mount
• Plug & Use Design
• Foam windscreen included
• Rugged alluminum alloy construction for main body Model :Vmic Mini

Type:14mm Unidirectional Condenser Microphone

Frequency Range :75Hz to 20kHz

Sensitivity:-35dB +/- 3dB (0dB=1V/Pa, at 1 KHz)

Maximum input S.P.L:f=1 kHz, THD<5% (105 dB)Output Impedance :200 ohmSignal to Noise Ratio:75 dB SPLPower :Plug-in powerDimensions:62 × 117 × 19mmWeight:69g (about 2.4oz)