TAKSTAR Wire Mic SGC-598

Stereo lavalier microphone for DSLR camera, camcorder,smartphone and recorder
Improved sensitivity and signal to noise
3.5mm audio output
5m cable length
Powered by one CR1130 battery (included)
Foam windscreen is included Type: Condenser microphone
Polar Pattern: Cardioid

Frequency Range: 50Hz to 18KHz

Sensitivity: -32±3dB (0dB=1V/Pa,at 1KHz)

Signal to Noise Ratio: >75 dB SPL

Battery Type: One LR44 battery

Cable: 5m/16.5 ft

Weight: 58g

Output: 3.5mm audio output

Two 1/8″ (3.5 mm) mono inputs One stereo input
Two XLR Inputs
One 1/8 (3.5 mm) stereo output
Mono/Stereo switch (M/S)
Left and Right Channel Control Knobs
Independent phantom power control for inputs. INPUT 1: 5V/OFF/3V; INPUT 2: 48V/OFF
LINE/MIC/PH switch
Level Meter Indicates the sound level in dB for each channel
Headphone jack to monitor the audio from microphones Frequency Response:20 Hz to 20 Khz, +/-0.5 dB

THD:Less than 0.01% @ 1 kHz, -30 dBu input

SNR:80 dB @ 1 kHz, -30 dBu input

INPUT1 GAIN:

LINE: 0 dB

MIC/PH: 20dB

INPUT2 GAIN

LINE: 0 dB

MIC/PH: 20dB

INPUT 1 Phantom Power:5V/3V power supplies

INPUT 2 Phantom Power:48V power supplies

Level Meter:-18 dB to +3 dB in 3 dB increments

Power Requirements:9 V alkaline or lithium battery

Battery Duration:

5 hours typical lithium battery (no phantom)

3 hour typical lithium battery (with phantom)

Dimensions:

(L x W x H) 136 mm x 80.5 mm x 62.5 mm

Weight:13.5 oz (0.385 kg)

Reliable, broadcast-quality audio
514 MHz – 596 MHz
96 selectable channels in 2 groups
Headphone monitoring
Easy-to-read LCD displays
Over 330-feet (100m) in open areas or 200-feet (60m) with obstacles
Optional body-pack and XLR transmitters for different applications Transmitter
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Frequency Range: 514 MHz – 596 MHz
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Signal to Noise Ratio: 70 dB or more
Spur Suppression: -60 dB
Voice Delay: 12 ms
Antenna: 1/4λ wire antenna
Audio input connector: TX9:3.5mm mini jack
HU9: noneTX-XLR9: XLR-3-11C type (female)
Reference audio input level: -60dBV (MIC input, 0dB attenuation)
Distortion: 0.5% or less
Weight: TX9: Approx. 211.4g (excluding batteries)
HU9: Approx. 338.2g (excluding batteries)

TX-XLR9: Approx. 138g (Excluding batteries)

Battery: Two AA size batteries
Dimensions: TX9: 170.9 x 63.5 x 30.0 mm
HU9: 254.0 x 52.0 x 52.0 mm
TX-XLR9: 105.5 x 43 x 34.7 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃
Receiver
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Audio output connector: 3.5mm mini jack
Antenna: 1/4λ wire antenna
Audio output level: -60dBV
Headphone output level: 30mW (16Ω)
Receiver frequencies: 514 MHz – 596 MHz
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Frequency response: 40Hz to 18kHz (+/-3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Weight: 218.7g (Excluding batteries)
Battery: Two AA size batteries
Dimensions: 170.9 x 63.5 x 30.0 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃

One stereo 1/8 (3.5 mm) Mini-Jack Input
Two mono 1/8 (3.5 mm) Mini-Jack Inputs
One stereo 1/8 (3.5 mm) Mini-Jack Output
Adjust the signal to each channel to set your optimum recording levels
Mono or stereo output mode
Attach a variety of microphonesor wireless receivers Frequency Response:20 Hz to 20 Khz (+/-0.5 dB)

Input Level:MIC setting: -35 dBu minimum

Gain:Unity

Dimensions:L 76.0 x W 59.5 x H 55.0 mm

Weight:153g ( 5.4 oz. )

　Two pro-standard XLR terminals
　Two real time audio level controls
　LINE/MIC/48V PH switches
　Three level gain controls (0dB, 10dB, 20dB)
　Sandard cold shoe mount
　Low cut switch (150Hz) Inputs:2x Balanced XLR inputs
Output:3.5mm TRS (for Cameras & Camcorders)

Power Requirements:9V Battery

Frequency Response：20 Hz to 20 kHz, +/-0.5 dB

SNR：80 dB @ 1 kHz, -30 dBu input

Dimensions (WxHxD)

XLR Adapter: 3.3 x 3.9 x 3.3″ (84 x 100 x 83mm)

Microphone: 1.7 x 7.4″ (43 x 187mm)

Weight：

XLR Adapter: 5.9 oz (167g)

Microphone: 2.1 oz (60g)