Additional information
Brand |
---|
Get free shipping for order over 500EGP
Reliable, broadcast-quality audio
514 MHz – 596 MHz
96 selectable channels in 2 groups
Headphone monitoring
Easy-to-read LCD displays
Over 330-feet (100m) in open areas or 200-feet (60m) with obstacles
Optional body-pack and XLR transmitters for different applications Transmitter
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Frequency Range: 514 MHz – 596 MHz
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Signal to Noise Ratio: 70 dB or more
Spur Suppression: -60 dB
Voice Delay: 12 ms
Antenna: 1/4λ wire antenna
Audio input connector: TX9:3.5mm mini jack
HU9: noneTX-XLR9: XLR-3-11C type (female)
Reference audio input level: -60dBV (MIC input, 0dB attenuation)
Distortion: 0.5% or less
Weight: TX9: Approx. 211.4g (excluding batteries)
HU9: Approx. 338.2g (excluding batteries)
TX-XLR9: Approx. 138g (Excluding batteries)
Battery: Two AA size batteries
Dimensions: TX9: 170.9 x 63.5 x 30.0 mm
HU9: 254.0 x 52.0 x 52.0 mm
TX-XLR9: 105.5 x 43 x 34.7 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃
Receiver
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Audio output connector: 3.5mm mini jack
Antenna: 1/4λ wire antenna
Audio output level: -60dBV
Headphone output level: 30mW (16Ω)
Receiver frequencies: 514 MHz – 596 MHz
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Frequency response: 40Hz to 18kHz (+/-3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Weight: 218.7g (Excluding batteries)
Battery: Two AA size batteries
Dimensions: 170.9 x 63.5 x 30.0 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃
13,200 EGPAdd to cart
Directional condenser microphone
An extra 3.5mm mic input
Headphone monitor jack
Integrated shoe-mount
Low cut filter (200 Hz)
3.5mm audio output to camera
Foam windscreen included
Lightweight construction
+10dB audio level switch Microphone Type :Directional Condenser
Frequency Range:75 Hz – 18 kHz
Sensitivity:-37dB +/- 1dB
Signal to Noise Ratio:75dB SPL
Battery:1 “AAA”
Output:3.5mm TRS
Dimensions:5.5 x 2.3 x 1.6″ (14 x 5.8 x 4.1cm)
Weight:2.1 oz (30g)
1,500 EGPAdd to cart
Four switchable channels to keep you free from interference
Detachable and flexible antenna can be rotated 360 degrees acrdingly for best sound
The high-band VHF provides pure sound
Record audio up to 60 metes away with no obstacle
Real-time monitoring
Volume control wheel
LED indicator light indicates battery life
Power provided by LR6/AA size alkaline battery
Three optional transmitters: bodypack, handheld and XLR plug-on transmitter
Includes a belt-pack transmitter, camera mountable receiver and an omnidirectional lavalier microphoneOperating Frequencies:
Channel A Channel B Channel C Channel D
203.65MHz 207.75MHz 211.55MHz 215.35MHz
Transmitters:
Operating Frequencies: 203-216MHz
Modulation Frequency: Modulation
Signal to noise ratio: 70dB or more
Antenna: 1/8λ wire antenna
Voice delay: 12ms
Battery: LR6/AA size alkaline Battery (not included)
Battery Life: 5 hours
Audio input connector: mini XLR
Current Consumption: 150 mA
Dimensions: L102*W62*H44.7 mm
Weight: 80g (2.8 oz) without battery
Receiver:
Operating Frequencies: 203-216MHz
Reception System: FM Superheterodyne
Reception Sensitivity: 2 µV for 30 dB S/N
Output Connector: 3.5 mm (1/8″) TRS
DC Input: 9V DC (center-positive)
Battery: LR6/AA size alkaline Battery (not included)
Current Consumption: 150 mA
Battery Life: 5 hours
Dimensions: 102 x 62.0 x 44.7
Antenna Length: 178mm
Weight: 80 g (2.8 oz) without battery
3,000 EGPAdd to cart
Optimised frequency response
Extreme low handling and wind noise
Excellent sound quality
Cardioid dynamic capsule
Rugged all-metal body Pick-up pattern:cardioid
Frequency Response:100Hz~10KHz
Sensitivity:0°~-52.4dB±3dB (0dB=1V/ubar at 1KHz)
Output Impedance:500Ω±30% at 1 KHz
Connector:3-pin XLR Connector
Dimensions:ø51 mm,length 258mm/approx.320g
4,250 EGPAdd to cart
Two pro-standard XLR terminals
Two real time audio level controls
LINE/MIC/48V PH switches
There level gain controls (0dB, 10dB, 20dB)
Standard cold shoe mount
Low cut switch (150Hz)
LED Indicator input Connections: 2 x XLR balanced – Mic/Line
(included SR-NV5 microphone takes up 1 input, if used)
Output Connection: 1 x 1/8″ (3.5 mm) wired connector
Power Requirements: 9 V alkaline or lithium battery
Frequency Response: 20 Hz to 20 Khz, +/-0.5 dB
THD: Less than 0.01% @ 1 kHz, -30 dBu input
SNR: 80 dB @ 1 kHz, -30 dBu input
Dimensions: XLR adapter (WxHxD)
3.31’’ x 3.94’’ x 3.27″ (84 x 100 x 83 mm)
Weight: XLR adapter: 5.9 oz (167g)
3,250 EGPOut of Stock
Cardioid broadcast sound quality
1400 mAh internal rechargeable lithium battery
Balanced output
+48V phantom power
High frequency boost button
High pass filter (150 Hz)
Signal to noise ratio:75 dB SPL (per IEC651)
-10 dB PAD button Acoustic Principle:Line gradient
Directional Pattern:Cardioid
Frequency Range:40 to 20k Hz (selectable HPF 150 Hz)
Sensitivity:-35±3dB(0dB=1V/Pa,at 1KHz) 1.5V 2.2kΩ
Output Impedance:200 ohm
Maximum Output:10 dBu (at 1 kHz, 1% THD into 1 kOhm)
Dynamic Range:119 dB (per IEC651)
Maximum SPL:135 dB
Signal to Noise Ratio:75 dB SPL (per IEC651)
Power:48V phantom power;
built-in lithium battery;
(battery life:150 hours)
Output Connection;
3-pin XLR
balanced output between Pin 2 (+)
Pin 3 (-) and Pin 1 (ground)
Dimensions:2.3 x 2.3 x 28.2 cm
Weight:171g (About 6 oz.)
Maximum SPL:135 dB
7,250 EGPAdd to cart
• Transducer Principle: Back Electret Condenser
• Directivity Characteristic: Hyper-cardioid
• Frequency Response: 40Hz-16kHz
• Sensitivity: -36dB±3dB (0dB=1V/Pa at 1kHz)
• Output Impedance: 100Ω±30% (at 1kHz)
• Equivalent Noise Level: ≤26dB A (IEC 581-5)
• Max. Input SPL: 130dB (THD ≤1.0% at 1kHz)
• Bass Filter: 10dB/octave at 80Hz
• Power Requirements: 9-52V DC Phantom Power
1,450 EGPAdd to cart
• Output to both DSLR camera and smartphone
• 3.5mm TRS & TRRS output cables included
• Integrated shock mount
• Plug & Use Design
• Foam windscreen included
• Rugged alluminum alloy construction for main body Model :Vmic Mini
Type:14mm Unidirectional Condenser Microphone
Frequency Range :75Hz to 20kHz
Sensitivity:-35dB +/- 3dB (0dB=1V/Pa, at 1 KHz)
Maximum input S.P.L:f=1 kHz, THD<5% (105 dB)Output Impedance :200 ohmSignal to Noise Ratio:75 dB SPLPower :Plug-in powerDimensions:62 × 117 × 19mmWeight:69g (about 2.4oz)
1,500 EGPAdd to cart
Directional 90° mic capsule
Integrated shock-mount
Limits Background Noise
Foam Windscreen Included Type:Condenser microphones
Connector:TRRS (3.5mm jack) for iOS and Mac
Frequency Response:35 Hz to 18 kHz
Signal to Noise Ratio:74dB SPL
Dimensions:2.8 x 0.6 x 0.5 inches
Weight:21g (0.74oz)
8,000 EGPAdd to cart
© All copyrights reserved. Developed by Swarms Agency