MIC BY-M1DM

Reliable, broadcast-quality audio
514 MHz – 596 MHz
96 selectable channels in 2 groups
Headphone monitoring
Easy-to-read LCD displays
Over 330-feet (100m) in open areas or 200-feet (60m) with obstacles
Optional body-pack and XLR transmitters for different applications Transmitter
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Frequency Range: 514 MHz – 596 MHz
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Signal to Noise Ratio: 70 dB or more
Spur Suppression: -60 dB
Voice Delay: 12 ms
Antenna: 1/4λ wire antenna
Audio input connector: TX9:3.5mm mini jack
HU9: noneTX-XLR9: XLR-3-11C type (female)
Reference audio input level: -60dBV (MIC input, 0dB attenuation)
Distortion: 0.5% or less
Weight: TX9: Approx. 211.4g (excluding batteries)
HU9: Approx. 338.2g (excluding batteries)

TX-XLR9: Approx. 138g (Excluding batteries)

Battery: Two AA size batteries
Dimensions: TX9: 170.9 x 63.5 x 30.0 mm
HU9: 254.0 x 52.0 x 52.0 mm
TX-XLR9: 105.5 x 43 x 34.7 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃
Receiver
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Audio output connector: 3.5mm mini jack
Antenna: 1/4λ wire antenna
Audio output level: -60dBV
Headphone output level: 30mW (16Ω)
Receiver frequencies: 514 MHz – 596 MHz
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Frequency response: 40Hz to 18kHz (+/-3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Weight: 218.7g (Excluding batteries)
Battery: Two AA size batteries
Dimensions: 170.9 x 63.5 x 30.0 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃

One stereo 1/8 (3.5 mm) Mini-Jack Input
Two mono 1/8 (3.5 mm) Mini-Jack Inputs
One stereo 1/8 (3.5 mm) Mini-Jack Output
Adjust the signal to each channel to set your optimum recording levels
Mono or stereo output mode
Attach a variety of microphonesor wireless receivers Frequency Response:20 Hz to 20 Khz (+/-0.5 dB)

Input Level:MIC setting: -35 dBu minimum

Gain:Unity

Dimensions:L 76.0 x W 59.5 x H 55.0 mm

Weight:153g ( 5.4 oz. )

Stereo lavalier microphone for DSLR camera, camcorder,smartphone and recorder
Improved sensitivity and signal to noise
3.5mm audio output
5m cable length
Powered by one CR1130 battery (included)
Foam windscreen is included Type: Condenser microphone
Polar Pattern: Cardioid

Frequency Range: 50Hz to 18KHz

Sensitivity: -32±3dB (0dB=1V/Pa,at 1KHz)

Signal to Noise Ratio: >75 dB SPL

Battery Type: One LR44 battery

Cable: 5m/16.5 ft

Weight: 58g

Output: 3.5mm audio output

Directional 90° mic capsule
Integrated shock-mount
Limits Background Noise
Foam Windscreen Included Type:Condenser microphones

Connector:TRRS (3.5mm jack) for iOS and Mac

Frequency Response:35 Hz to 18 kHz

Signal to Noise Ratio:74dB SPL

Dimensions:2.8 x 0.6 x 0.5 inches

Weight:21g (0.74oz)

Two balanced XLR inputs One monitor input jack
One stereo 1/8″ (3.5 mm) mini-jack output
Left and Right control knobs allows you to adjust the signal of each channel to the optimum recording levels
M/S Switch select mono or stereo output mode
LINE / MIC/ PH Switches
PH 12V/OFF/48V Switch
Level Meter indicates the sound level in dB for each channel
The LED signal indicators flash red for overload
Gain switch selects LOW for unity gain or HIGH for +20dB boost in sound level
Headphone jack to monitor the audio from microphones or camera
AGC ON/OFF Switch —Auto Gain Control will increase the gain to maximum level, the AGC Disable function reduces the hiss when the camera is recording during quiet moments
GND1/GND2 Dual-mode grounding switch
Dual Headphone Jacks allow you to monitor the audio from the adapter at the input and output points Maximum Input Levels：

MIC 0 dB on the Level meter at -44 dBu input

LINE 0 dB on the Level meter at +10 dBu input

Output Level:Nominal MIC levels

Frequency Response:20 Hz to 20 kHz (+/- 0.5 dB)

THD:Less than 0.01% @ 1kHz, -30dBu input

S/N Ratio:85 dB @ 1 Khz, -30 dBu input

Gain:

LO gain: 0 dB

HI gain: 20 dB

Phantom Power:

Dual regulated 12 or 48 volt power supplies

Current to 14 mA (direct short)

Level meter:

-18 to +3 dB in 3 dB increments

Battery Type:One 9 volt alkaline or lithium battery

Battery Duration:

3 hours typical with alkaline battery (no phantom)

8 hours typical with lithium battery (no phantom)

Dimensions:

(L x W x H) 155 mm x 98 mm x 64 mm

Weight:21.1 oz (0.599 kg)