BY-clp2

XLR connector
+48V phantom power
Records 24bit/48kHz wav audio
Easy-to-use menu and LCD display
Input audio control
Switchable low-cut filter
3.5mm headphone monitor output
Lightweight all-metal construction Recording Media:

micro SD card (64MB~2GB)

microSDHC card (4GB~32GB)

Recording/Playback Format:24/48kHz 16/24bit, mono/poly BWF

Recording/Playback Format:24/48kHz 16/24bit, mono/poly BWF

Input Connector:XLR jack (Female), 1GND;2HOT;3COLD

Mic Input Level:Selectable at -12dBu~+33dBu

Headphone Jack:1/8’’ (3.5mm)

Frequency Response:20Hz~22kHz +/-2dB

Distortion:0.05% (1kHz sine wave)

S/N ratio:92dB or higher

Battery Type:2x AA Battery (alkaline, NiMH or lithium)

Power Consumption:0.65W (Maximum)

Phantom Power:+48V

Reliable, broadcast-quality audio
514 MHz – 596 MHz
96 selectable channels in 2 groups
Headphone monitoring
Easy-to-read LCD displays
Over 330-feet (100m) in open areas or 200-feet (60m) with obstacles
Optional body-pack and XLR transmitters for different applications Transmitter
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Frequency Range: 514 MHz – 596 MHz
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Signal to Noise Ratio: 70 dB or more
Spur Suppression: -60 dB
Voice Delay: 12 ms
Antenna: 1/4λ wire antenna
Audio input connector: TX9:3.5mm mini jack
HU9: noneTX-XLR9: XLR-3-11C type (female)
Reference audio input level: -60dBV (MIC input, 0dB attenuation)
Distortion: 0.5% or less
Weight: TX9: Approx. 211.4g (excluding batteries)
HU9: Approx. 338.2g (excluding batteries)

TX-XLR9: Approx. 138g (Excluding batteries)

Battery: Two AA size batteries
Dimensions: TX9: 170.9 x 63.5 x 30.0 mm
HU9: 254.0 x 52.0 x 52.0 mm
TX-XLR9: 105.5 x 43 x 34.7 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃
Receiver
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Audio output connector: 3.5mm mini jack
Antenna: 1/4λ wire antenna
Audio output level: -60dBV
Headphone output level: 30mW (16Ω)
Receiver frequencies: 514 MHz – 596 MHz
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Frequency response: 40Hz to 18kHz (+/-3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Weight: 218.7g (Excluding batteries)
Battery: Two AA size batteries
Dimensions: 170.9 x 63.5 x 30.0 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃

Directional condenser microphone
An extra 3.5mm mic input
Headphone monitor jack
Integrated shoe-mount
Low cut filter (200 Hz)
3.5mm audio output to camera
Foam windscreen included
Lightweight construction
+10dB audio level switch Microphone Type :Directional Condenser

Frequency Range:75 Hz – 18 kHz

Sensitivity:-37dB +/- 1dB

Signal to Noise Ratio:75dB SPL

Battery:1 “AAA”

Output:3.5mm TRS

Dimensions:5.5 x 2.3 x 1.6″ (14 x 5.8 x 4.1cm)

Weight:2.1 oz (30g)

Cardioid broadcast sound quality
1400 mAh internal rechargeable lithium battery
Balanced output
+48V phantom power
High frequency boost button
High pass filter (150 Hz)
Signal to noise ratio:75 dB SPL (per IEC651)
-10 dB PAD button Acoustic Principle:Line gradient
Directional Pattern:Cardioid

Frequency Range:40 to 20k Hz (selectable HPF 150 Hz)

Sensitivity:-35±3dB(0dB=1V/Pa,at 1KHz) 1.5V 2.2kΩ

Output Impedance:200 ohm

Maximum Output:10 dBu (at 1 kHz, 1% THD into 1 kOhm)

Dynamic Range:119 dB (per IEC651)

Maximum SPL:135 dB

Signal to Noise Ratio:75 dB SPL (per IEC651)

Power:48V phantom power;

built-in lithium battery;

(battery life:150 hours)

Output Connection;

3-pin XLR

balanced output between Pin 2 (+)

Pin 3 (-) and Pin 1 (ground)

Dimensions:2.3 x 2.3 x 28.2 cm

Weight:171g (About 6 oz.)

Maximum SPL:135 dB