• Single: back-electret
• Polar pattern: cardioid
• Frequency Response: 50Hz-18kHz
• Sensitivity:-45dB ± 3dB (0dB = 1V/Pa at 1kHz)
• Output Impedance: 680Ω ± 30% (at 1kHz)
• Maximum working voltage: 10V
• Voltage: 1.5V
• Cable length: Ø1.7mm x 1.2m
| Brand |
|---|
Two pro-standard XLR terminals
Two real time audio level controls
LINE/MIC/48V PH switches
Three level gain controls (0dB, 10dB, 20dB)
Sandard cold shoe mount
Low cut switch (150Hz) Inputs:2x Balanced XLR inputs
Output:3.5mm TRS (for Cameras & Camcorders)
Power Requirements:9V Battery
Frequency Response：20 Hz to 20 kHz, +/-0.5 dB
SNR：80 dB @ 1 kHz, -30 dBu input
Dimensions (WxHxD)
XLR Adapter: 3.3 x 3.9 x 3.3″ (84 x 100 x 83mm)
Microphone: 1.7 x 7.4″ (43 x 187mm)
Weight：
XLR Adapter: 5.9 oz (167g)
Microphone: 2.1 oz (60g)
Two pro-standard XLR terminals
Two real time audio level controls
LINE/MIC/48V PH switches
There level gain controls (0dB, 10dB, 20dB)
Standard cold shoe mount
Low cut switch (150Hz)
LED Indicator input Connections: 2 x XLR balanced – Mic/Line
(included SR-NV5 microphone takes up 1 input, if used)
Output Connection: 1 x 1/8″ (3.5 mm) wired connector
Power Requirements: 9 V alkaline or lithium battery
Frequency Response: 20 Hz to 20 Khz, +/-0.5 dB
THD: Less than 0.01% @ 1 kHz, -30 dBu input
SNR: 80 dB @ 1 kHz, -30 dBu input
Dimensions: XLR adapter (WxHxD)
3.31’’ x 3.94’’ x 3.27″ (84 x 100 x 83 mm)
Weight: XLR adapter: 5.9 oz (167g)
• Transducer Principle: Back Electret Condenser
• Directivity Characteristic: Hyper-cardioid
• Frequency Response: 40Hz-16kHz
• Sensitivity: -36dB±3dB (0dB=1V/Pa at 1kHz)
• Output Impedance: 100Ω±30% (at 1kHz)
• Equivalent Noise Level: ≤26dB A (IEC 581-5)
• Max. Input SPL: 130dB (THD ≤1.0％ at 1kHz)
• Bass Filter: 10dB/octave at 80Hz
• Power Requirements: 9-52V DC Phantom Power
One stereo 1/8 (3.5 mm) Mini-Jack Input
Two mono 1/8 (3.5 mm) Mini-Jack Inputs
One stereo 1/8 (3.5 mm) Mini-Jack Output
Adjust the signal to each channel to set your optimum recording levels
Mono or stereo output mode
Attach a variety of microphonesor wireless receivers Frequency Response:20 Hz to 20 Khz (+/-0.5 dB)
Input Level:MIC setting: -35 dBu minimum
Gain:Unity
Dimensions:L 76.0 x W 59.5 x H 55.0 mm
Weight:153g ( 5.4 oz. )
Directional 90° mic capsule
Integrated shock-mount
Limits Background Noise
Foam Windscreen Included Type:Condenser microphones
Connector:TRRS (3.5mm jack) for iOS and Mac
Frequency Response:35 Hz to 18 kHz
Signal to Noise Ratio:74dB SPL
Dimensions:2.8 x 0.6 x 0.5 inches
Weight:21g (0.74oz)
Improves audio quality of smart phone
Two 1/8’’ (3.5mm) stereo mic/line inputs
One mini XLR microphone input (a mini-XLR to standard-XLR cable included)
+48V phantom power
One 1/8’’ (3.5mm) stereo line output to phone
One 1/8’’ (3.5mm) headphone monitor output
PLAY/REC monitor switch
Independent L/R level meters
Volume control knob
Includes two plug-in power condenser microphones
Includes a device holder and aluminum hand grip
Power provided by 9V battery Frequency Response: 20 Hz to 20 Khz, +/-0.5 dB
SNR: 82 dB @ 1 kHz, -30 dBu input
Distortion: Less than 0.03% @ 1 kHz, -30 dBu input
INPUT 1 GAIN: 15 dB
INPUT 2 GAIN & MINI XLR Jack: 15 dB
INPUT 1 & INPUT 2 Power: 5V power supplies
MINI Jack Phantom Power: 48V power supplies
VU Meter: -18 dB to +3 dB in 3 dB increments
Power Requirements: 9V alkaline or lithium battery
Dimensions: L 95 x W35 x H298 mm
Weight: 0.74 kg (26.1 oz.)
Two Independent Channels
Two XLR Microphone Inputs
Two 3.5mm (TRS) Microphone Inputs
Two 1/4″ Guitar Inputs
Output switch for smartphone (TRRS) or Camera/Camcorder/Recorder (TRS)
3.5mm Headphone Output Jack for Monitoring
+48v Phantom Power Switch
Mono/Stereo Toggle Output Switch Frequency Response:20 Hz to 20 Khz (+/-0.5 dB)
THD:Less than 0.01% @ 1 kHz, -30 dBu input
SNR:80 dB @ 1 kHz, -30 dBu input
Input1:
1x XLR mic input
1 x 1/4″ (6.35mm) guitar input
1 x 1/8″ (3.5mm) input
Input2:
1 x XLR mic input
1 x 1/4″ (6.35mm) guitar input
1 x 1/8″ (3.5mm) input
Output:1 x 1/8″ (3.5mm) CAB LINE
Gain:+20 dB to Infinity
Phantom Power:48V power supplie
Power Requirements:9V alkaline or lithium battery
Dimensions:L 4.7″ x W 1.6″ x H 1.6″ (12 x 4 x 4 cm)
Weight:4.6 oz. (130g) (excluding battery)
Two balanced XLR inputs One monitor input jack
One stereo 1/8″ (3.5 mm) mini-jack output
Left and Right control knobs allows you to adjust the signal of each channel to the optimum recording levels
M/S Switch select mono or stereo output mode
LINE / MIC/ PH Switches
PH 12V/OFF/48V Switch
Level Meter indicates the sound level in dB for each channel
The LED signal indicators flash red for overload
Gain switch selects LOW for unity gain or HIGH for +20dB boost in sound level
Headphone jack to monitor the audio from microphones or camera
AGC ON/OFF Switch —Auto Gain Control will increase the gain to maximum level, the AGC Disable function reduces the hiss when the camera is recording during quiet moments
GND1/GND2 Dual-mode grounding switch
Dual Headphone Jacks allow you to monitor the audio from the adapter at the input and output points Maximum Input Levels：
MIC 0 dB on the Level meter at -44 dBu input
LINE 0 dB on the Level meter at +10 dBu input
Output Level:Nominal MIC levels
Frequency Response:20 Hz to 20 kHz (+/- 0.5 dB)
THD:Less than 0.01% @ 1kHz, -30dBu input
S/N Ratio:85 dB @ 1 Khz, -30 dBu input
Gain:
LO gain: 0 dB
HI gain: 20 dB
Phantom Power:
Dual regulated 12 or 48 volt power supplies
Current to 14 mA (direct short)
Level meter:
-18 to +3 dB in 3 dB increments
Battery Type:One 9 volt alkaline or lithium battery
Battery Duration:
3 hours typical with alkaline battery (no phantom)
8 hours typical with lithium battery (no phantom)
Dimensions:
(L x W x H) 155 mm x 98 mm x 64 mm
Weight:21.1 oz (0.599 kg)
2 Sherif Street, Downtown, Cairo, Egypt.
Family Mall, First District, Behind “Arafa Group”, 6 October City.
© All copyrights reserved. Developed by Swarms Agency
