Two balanced XLR inputs One monitor input jack
One stereo 1/8″ (3.5 mm) mini-jack output
Left and Right control knobs allows you to adjust the signal of each channel to the optimum recording levels
M/S Switch select mono or stereo output mode
LINE / MIC/ PH Switches
PH 12V/OFF/48V Switch
Level Meter indicates the sound level in dB for each channel
The LED signal indicators flash red for overload
Gain switch selects LOW for unity gain or HIGH for +20dB boost in sound level
Headphone jack to monitor the audio from microphones or camera
AGC ON/OFF Switch —Auto Gain Control will increase the gain to maximum level, the AGC Disable function reduces the hiss when the camera is recording during quiet moments
GND1/GND2 Dual-mode grounding switch
Dual Headphone Jacks allow you to monitor the audio from the adapter at the input and output points Maximum Input Levels：
MIC 0 dB on the Level meter at -44 dBu input
LINE 0 dB on the Level meter at +10 dBu input
Output Level:Nominal MIC levels
Frequency Response:20 Hz to 20 kHz (+/- 0.5 dB)
THD:Less than 0.01% @ 1kHz, -30dBu input
S/N Ratio:85 dB @ 1 Khz, -30 dBu input
Gain:
LO gain: 0 dB
HI gain: 20 dB
Phantom Power:
Dual regulated 12 or 48 volt power supplies
Current to 14 mA (direct short)
Level meter:
-18 to +3 dB in 3 dB increments
Battery Type:One 9 volt alkaline or lithium battery
Battery Duration:
3 hours typical with alkaline battery (no phantom)
8 hours typical with lithium battery (no phantom)
Dimensions:
(L x W x H) 155 mm x 98 mm x 64 mm
Weight:21.1 oz (0.599 kg)
Reviews
There are no reviews yet.