Internal spacing
Diameter: 125mm
Length: 325mm
Net weight: 750g
Dimensions(L*H*D):
480*134*190mm(Min)
480*134*314mm(Max)
Additional information
Brand |
---|
Get free shipping for order over 500EGP
• Transducer Principle: Back Electret Condenser
• Directivity Characteristic: Cardioid, stereo
• Frequency Response: 30Hz-16KHz
• Sensitivity: -44dB±3dB(0dB=1V/Pa at 1KHz)
• Max. Input SPL: 130dB(THD≤1.0% at 1KHz)
• Low Frequency Attenuation: 80Hz 10dB/octave
• Output Impedance: ≤200Ω
• Power Requirement: CR2032 3V button battery
• Net Weight: 115g
1,500 EGPAdd to cart
8,000 EGPAdd to cart
Stereo lavalier microphone for DSLR camera, camcorder,smartphone and recorder
Improved sensitivity and signal to noise
3.5mm audio output
5m cable length
Powered by one CR1130 battery (included)
Foam windscreen is included Type: Condenser microphone
Polar Pattern: Cardioid
Frequency Range: 50Hz to 18KHz
Sensitivity: -32±3dB (0dB=1V/Pa,at 1KHz)
Signal to Noise Ratio: >75 dB SPL
Battery Type: One LR44 battery
Cable: 5m/16.5 ft
Weight: 58g
Output: 3.5mm audio output
1,750 EGPAdd to cart
3,600 EGPAdd to cart
Inputs:
One 1/8″ (3.5 mm) Auxiliary Mini-Jack Input
Two balanced XLR inputs
Output:
One stereo 1/8″ (3.5 mm) Mini-Jack Output
Dual Trim Control Knobs:
Adjust the signal of each channel to the optimum recording level
Mono /Stereo Switch:
LINE / MIC Switch:
GND1/GND2 Ground switch eliminate ground hum and noise
No Powe or Battery is Needed Input Level:
MIC:-35 dBu
LINE:-10 – +4 dBu
Input Level:General Mic Levels
Frequency Response:10Hz to 100kHz (+/-1.5 dB)
Dimensions:87 (L) x 80(W) x 52(H) mm
Weight:191g (6.7oz.)
1,600 EGPAdd to cart
XLR connector
+48V phantom power
Records 24bit/48kHz wav audio
Easy-to-use menu and LCD display
Input audio control
Switchable low-cut filter
3.5mm headphone monitor output
Lightweight all-metal construction Recording Media:
micro SD card (64MB~2GB)
microSDHC card (4GB~32GB)
Recording/Playback Format:24/48kHz 16/24bit, mono/poly BWF
Recording/Playback Format:24/48kHz 16/24bit, mono/poly BWF
Input Connector:XLR jack (Female), 1GND;2HOT;3COLD
Mic Input Level:Selectable at -12dBu~+33dBu
Headphone Jack:1/8’’ (3.5mm)
Frequency Response:20Hz~22kHz +/-2dB
Distortion:0.05% (1kHz sine wave)
S/N ratio:92dB or higher
Battery Type:2x AA Battery (alkaline, NiMH or lithium)
Power Consumption:0.65W (Maximum)
Phantom Power:+48V
3,650 EGPAdd to cart
Two Independent Channels
Two XLR Microphone Inputs
Two 3.5mm (TRS) Microphone Inputs
Two 1/4″ Guitar Inputs
Output switch for smartphone (TRRS) or Camera/Camcorder/Recorder (TRS)
3.5mm Headphone Output Jack for Monitoring
+48v Phantom Power Switch
Mono/Stereo Toggle Output Switch Frequency Response:20 Hz to 20 Khz (+/-0.5 dB)
THD:Less than 0.01% @ 1 kHz, -30 dBu input
SNR:80 dB @ 1 kHz, -30 dBu input
Input1:
1x XLR mic input
1 x 1/4″ (6.35mm) guitar input
1 x 1/8″ (3.5mm) input
Input2:
1 x XLR mic input
1 x 1/4″ (6.35mm) guitar input
1 x 1/8″ (3.5mm) input
Output:1 x 1/8″ (3.5mm) CAB LINE
Gain:+20 dB to Infinity
Phantom Power:48V power supplie
Power Requirements:9V alkaline or lithium battery
Dimensions:L 4.7″ x W 1.6″ x H 1.6″ (12 x 4 x 4 cm)
Weight:4.6 oz. (130g) (excluding battery)
2,600 EGPAdd to cart
• Transducer Principle: Back Electret Condenser
• Directivity Characteristic: Hyper-cardioid
• Frequency Response: 40Hz-16kHz
• Sensitivity: -36dB±3dB (0dB=1V/Pa at 1kHz)
• Output Impedance: 100Ω±30% (at 1kHz)
• Equivalent Noise Level: ≤26dB A (IEC 581-5)
• Max. Input SPL: 130dB (THD ≤1.0% at 1kHz)
• Bass Filter: 10dB/octave at 80Hz
• Power Requirements: 9-52V DC Phantom Power
1,450 EGPAdd to cart
• Transducer Principle: Back Electret Condenser
• Directivity Characteristic: Cardioid
• Frequency Response: 50Hz-18kHz
• Sensitivity: -45dB±3dB (0dB=1V/Pa at 1kHz)
• Output Impedance: 1000Ω±30% (at 1kHz)
• Max. Input SPL: 136dB (THD ≤1.0% at 1kHz)
• Power Requirements: 1.5V AA Battery
• Net Weight: 258g
2,150 EGPAdd to cart
High sensitivity condenser microphone specially designed for camera
Cardioid directivity characteristic can effectively reduce the ambient noise
Optional +10dB sensitivity tone up and 200Hz bass filter meet the demand of different applications
Shock proof design can reduce the mechanical noise of cameras and other vibration noise
Rugged alu mic housing features effective EMI resistance
Powered by 1.5V AA alkaline battery, playtime is up to 100hrs
Low power indicator
© All copyrights reserved. Developed by Swarms Agency