BOYA BY-K4 – 3.5mm TRS (Female) to Type-C (Male) Audio Adapter
Additional information
Brand |
---|
Get free shipping for order over 500EGP
• Transducer Principle: Back Electret Condenser
• Directivity Characteristic: Cardioid, stereo
• Frequency Response: 30Hz-16KHz
• Sensitivity: -44dB±3dB(0dB=1V/Pa at 1KHz)
• Max. Input SPL: 130dB(THD≤1.0% at 1KHz)
• Low Frequency Attenuation: 80Hz 10dB/octave
• Output Impedance: ≤200Ω
• Power Requirement: CR2032 3V button battery
• Net Weight: 115g
1,500 EGPAdd to cart
• Carrier Frequency:780-789MHZ
• Frequency Response:30Hz-15KHz
• Number of Channels:6
• Transmit Power:≤10dBm
• Receiving Sensitivity:S/N:12dB 3uV
• S/N Ratio:≥50dB
• Operating Range: >100m
• Transmitter and Receiver Power Supply: 2×1.5 AA Alkaline battery
3,600 EGPAdd to cart
Improves audio quality of smart phone
Two 1/8’’ (3.5mm) stereo mic/line inputs
One mini XLR microphone input (a mini-XLR to standard-XLR cable included)
+48V phantom power
One 1/8’’ (3.5mm) stereo line output to phone
One 1/8’’ (3.5mm) headphone monitor output
PLAY/REC monitor switch
Independent L/R level meters
Volume control knob
Includes two plug-in power condenser microphones
Includes a device holder and aluminum hand grip
Power provided by 9V battery Frequency Response: 20 Hz to 20 Khz, +/-0.5 dB
SNR: 82 dB @ 1 kHz, -30 dBu input
Distortion: Less than 0.03% @ 1 kHz, -30 dBu input
INPUT 1 GAIN: 15 dB
INPUT 2 GAIN & MINI XLR Jack: 15 dB
INPUT 1 & INPUT 2 Power: 5V power supplies
MINI Jack Phantom Power: 48V power supplies
VU Meter: -18 dB to +3 dB in 3 dB increments
Power Requirements: 9V alkaline or lithium battery
Dimensions: L 95 x W35 x H298 mm
Weight: 0.74 kg (26.1 oz.)
3,000 EGPAdd to cart
Two Independent Channels
Two XLR Microphone Inputs
Two 3.5mm (TRS) Microphone Inputs
Two 1/4″ Guitar Inputs
Output switch for smartphone (TRRS) or Camera/Camcorder/Recorder (TRS)
3.5mm Headphone Output Jack for Monitoring
+48v Phantom Power Switch
Mono/Stereo Toggle Output Switch Frequency Response:20 Hz to 20 Khz (+/-0.5 dB)
THD:Less than 0.01% @ 1 kHz, -30 dBu input
SNR:80 dB @ 1 kHz, -30 dBu input
Input1:
1x XLR mic input
1 x 1/4″ (6.35mm) guitar input
1 x 1/8″ (3.5mm) input
Input2:
1 x XLR mic input
1 x 1/4″ (6.35mm) guitar input
1 x 1/8″ (3.5mm) input
Output:1 x 1/8″ (3.5mm) CAB LINE
Gain:+20 dB to Infinity
Phantom Power:48V power supplie
Power Requirements:9V alkaline or lithium battery
Dimensions:L 4.7″ x W 1.6″ x H 1.6″ (12 x 4 x 4 cm)
Weight:4.6 oz. (130g) (excluding battery)
2,600 EGPAdd to cart
One stereo 1/8 (3.5 mm) Mini-Jack Input
Two mono 1/8 (3.5 mm) Mini-Jack Inputs
One stereo 1/8 (3.5 mm) Mini-Jack Output
Adjust the signal to each channel to set your optimum recording levels
Mono or stereo output mode
Attach a variety of microphonesor wireless receivers Frequency Response:20 Hz to 20 Khz (+/-0.5 dB)
Input Level:MIC setting: -35 dBu minimum
Gain:Unity
Dimensions:L 76.0 x W 59.5 x H 55.0 mm
Weight:153g ( 5.4 oz. )
1,300 EGPAdd to cart
Two 1/8″ (3.5 mm) mono inputs One stereo input
Two XLR Inputs
One 1/8 (3.5 mm) stereo output
Mono/Stereo switch (M/S)
Left and Right Channel Control Knobs
Independent phantom power control for inputs. INPUT 1: 5V/OFF/3V; INPUT 2: 48V/OFF
LINE/MIC/PH switch
Level Meter Indicates the sound level in dB for each channel
Headphone jack to monitor the audio from microphones Frequency Response:20 Hz to 20 Khz, +/-0.5 dB
THD:Less than 0.01% @ 1 kHz, -30 dBu input
SNR:80 dB @ 1 kHz, -30 dBu input
INPUT1 GAIN:
LINE: 0 dB
MIC/PH: 20dB
INPUT2 GAIN
LINE: 0 dB
MIC/PH: 20dB
INPUT 1 Phantom Power:5V/3V power supplies
INPUT 2 Phantom Power:48V power supplies
Level Meter:-18 dB to +3 dB in 3 dB increments
Power Requirements:9 V alkaline or lithium battery
Battery Duration:
5 hours typical lithium battery (no phantom)
3 hour typical lithium battery (with phantom)
Dimensions:
(L x W x H) 136 mm x 80.5 mm x 62.5 mm
Weight:13.5 oz (0.385 kg)
2,800 EGPAdd to cart
High sensitivity condenser microphone specially designed for camera
Cardioid directivity characteristic can effectively reduce the ambient noise
Optional +10dB sensitivity tone up and 200Hz bass filter meet the demand of different applications
Shock proof design can reduce the mechanical noise of cameras and other vibration noise
Rugged alu mic housing features effective EMI resistance
Powered by 1.5V AA alkaline battery, playtime is up to 100hrs
Low power indicator
Directional condenser microphone
An extra 3.5mm mic input
Headphone monitor jack
Integrated shoe-mount
Low cut filter (200 Hz)
3.5mm audio output to camera
Foam windscreen included
Lightweight construction
+10dB audio level switch Microphone Type :Directional Condenser
Frequency Range:75 Hz – 18 kHz
Sensitivity:-37dB +/- 1dB
Signal to Noise Ratio:75dB SPL
Battery:1 “AAA”
Output:3.5mm TRS
Dimensions:5.5 x 2.3 x 1.6″ (14 x 5.8 x 4.1cm)
Weight:2.1 oz (30g)
1,500 EGPAdd to cart
© All copyrights reserved. Developed by Swarms Agency