The RODE NTG4+ is a professional-grade shotgun condenser microphone engineered for indie filmmakers, TV productions, and documentary crews who demand broadcast-quality audio in any environment. Featuring a supercardioid polar pattern, ultra-low self-noise of 16 dBA, and high sensitivity, the NTG4+ captures warm, natural sound with exceptional clarity whether mounted on a boompole or attached directly to a camera.
What sets the RODE NTG4+ apart is its versatile dual power system — run it on standard 48V phantom power or its built-in rechargeable lithium battery offering up to 150 hours of operation, rechargeable in just 2 hours via Micro-USB. Combined with digitally switchable controls for a 75 Hz low-cut filter, -10 dB pad, and +6 dB treble boost, this shotgun mic gives you complete tonal control on set without touching it in post-production.
Key features
- Broadcast-Quality Low Noise: 16 dBA self-noise and high-sensitivity condenser element deliver detailed, hiss-free audio ideal for professional film and TV production.
- Supercardioid Polar Pattern: The 10.9-inch body and tightly focused supercardioid pattern reject off-axis noise from the sides, keeping your subject’s voice front and center.
- Dual Power Flexibility: Operates on 48V phantom power or an internal rechargeable lithium battery providing up to 150 hours of run time — perfect for remote shoots with no power source.
- Digitally Switchable Tone Controls: Instantly apply a 75 Hz low-cut filter to eliminate hum and rumble, a -10 dB pad for loud sources, or a +6 dB treble boost for enhanced vocal clarity — and settings are retained when powered off.
- Fast Recharge via Micro-USB: The internal battery fully recharges in just 2 hours from any USB source — laptop, power bank, or car charger — minimising downtime on location.
- Robust Yet Lightweight Metal Body: The all-metal housing withstands the rigours of field production while remaining light enough for extended boompole use, and includes a foam windscreen plus mic clip in the box.
Specifications
| Microphone Type | Shotgun Condenser |
|---|---|
| Polar Pattern | Supercardioid |
| Self-Noise | 16 dBA |
| Pad | -10 dB switchable |
| Low-Cut Filter | 75 Hz selectable |
| Treble Boost | +6 dB switchable |
| Power Options | 48V Phantom Power or Internal Rechargeable Lithium Battery (up to 150 hrs) |
| Battery Charge Time | 2 hours via Micro-USB |
| Output Connector | 3-pin XLR balanced |
| Body Length | 10.9 inches, lightweight metal housing |
Frequently asked questions
Can the RODE NTG4+ be used without phantom power on a camera with no XLR input?
The NTG4+ outputs via a balanced 3-pin XLR connector and requires either 48V phantom power or its internal rechargeable lithium battery to operate. To connect it to a camera without XLR, you would need a third-party adapter or portable audio recorder — the mic itself does not have a 3.5mm output.
How long does the internal battery last and how do I recharge it?
The built-in rechargeable lithium battery provides up to 150 hours of continuous operation. Recharging is done via the included Micro-USB cable and takes approximately 2 hours using any USB power source such as a computer, USB power brick, or vehicle charger.
What do the digital switches on the NTG4+ do and do they reset when the mic is turned off?
The NTG4+ features three digitally switchable settings: a 75 Hz low-cut filter to reduce low-frequency noise like traffic and air conditioning, a -10 dB pad to prevent distortion from loud sources, and a +6 dB treble boost for added vocal clarity. Crucially, the digital switching system retains the state of all settings even after the microphone is powered off, so your configuration is preserved between takes.
