Takstar WTG-500 Wireless

Optimised frequency response
Extreme low handling and wind noise
Excellent sound quality
Cardioid dynamic capsule
Rugged all-metal body Pick-up pattern:cardioid

Frequency Response:100Hz~10KHz

Sensitivity:0°~-52.4dB±3dB (0dB=1V/ubar at 1KHz)

Output Impedance:500Ω±30% at 1 KHz

Connector:3-pin XLR Connector

Dimensions:ø51 mm,length 258mm/approx.320g

Four switchable channels to keep you free from interference
Detachable and flexible antenna can be rotated 360 degrees acrdingly for best sound
The high-band VHF provides pure sound
Record audio up to 60 metes away with no obstacle
Real-time monitoring
Volume control wheel
LED indicator light indicates battery life
Power provided by LR6/AA size alkaline battery
Three optional transmitters: bodypack, handheld and XLR plug-on transmitter
Includes a belt-pack transmitter, camera mountable receiver and an omnidirectional lavalier microphoneOperating Frequencies:
Channel A Channel B Channel C Channel D
203.65MHz 207.75MHz 211.55MHz 215.35MHz
Transmitters:
Operating Frequencies: 203-216MHz
Modulation Frequency: Modulation
Signal to noise ratio: 70dB or more
Antenna: 1/8λ wire antenna
Voice delay: 12ms
Battery: LR6/AA size alkaline Battery (not included)
Battery Life: 5 hours
Audio input connector: mini XLR
Current Consumption: 150 mA
Dimensions: L102*W62*H44.7 mm
Weight: 80g (2.8 oz) without battery
Receiver:
Operating Frequencies: 203-216MHz
Reception System: FM Superheterodyne
Reception Sensitivity: 2 µV for 30 dB S/N
Output Connector: 3.5 mm (1/8″) TRS
DC Input: 9V DC (center-positive)
Battery: LR6/AA size alkaline Battery (not included)
Current Consumption: 150 mA
Battery Life: 5 hours
Dimensions: 102 x 62.0 x 44.7
Antenna Length: 178mm
Weight: 80 g (2.8 oz) without battery

Two balanced XLR inputs One monitor input jack
One stereo 1/8″ (3.5 mm) mini-jack output
Left and Right control knobs allows you to adjust the signal of each channel to the optimum recording levels
M/S Switch select mono or stereo output mode
LINE / MIC/ PH Switches
PH 12V/OFF/48V Switch
Level Meter indicates the sound level in dB for each channel
The LED signal indicators flash red for overload
Gain switch selects LOW for unity gain or HIGH for +20dB boost in sound level
Headphone jack to monitor the audio from microphones or camera
AGC ON/OFF Switch —Auto Gain Control will increase the gain to maximum level, the AGC Disable function reduces the hiss when the camera is recording during quiet moments
GND1/GND2 Dual-mode grounding switch
Dual Headphone Jacks allow you to monitor the audio from the adapter at the input and output points Maximum Input Levels：

MIC 0 dB on the Level meter at -44 dBu input

LINE 0 dB on the Level meter at +10 dBu input

Output Level:Nominal MIC levels

Frequency Response:20 Hz to 20 kHz (+/- 0.5 dB)

THD:Less than 0.01% @ 1kHz, -30dBu input

S/N Ratio:85 dB @ 1 Khz, -30 dBu input

Gain:

LO gain: 0 dB

HI gain: 20 dB

Phantom Power:

Dual regulated 12 or 48 volt power supplies

Current to 14 mA (direct short)

Level meter:

-18 to +3 dB in 3 dB increments

Battery Type:One 9 volt alkaline or lithium battery

Battery Duration:

3 hours typical with alkaline battery (no phantom)

8 hours typical with lithium battery (no phantom)

Dimensions:

(L x W x H) 155 mm x 98 mm x 64 mm

Weight:21.1 oz (0.599 kg)

One stereo 1/8 (3.5 mm) Mini-Jack Input
Two mono 1/8 (3.5 mm) Mini-Jack Inputs
One stereo 1/8 (3.5 mm) Mini-Jack Output
Adjust the signal to each channel to set your optimum recording levels
Mono or stereo output mode
Attach a variety of microphonesor wireless receivers Frequency Response:20 Hz to 20 Khz (+/-0.5 dB)

Input Level:MIC setting: -35 dBu minimum

Gain:Unity

Dimensions:L 76.0 x W 59.5 x H 55.0 mm

Weight:153g ( 5.4 oz. )

Compatible with the receiver of SR-WM4C wireless system
Four switchable channels to keep you free from interference
Handheld design for recording applications like interview
The high-band VHF provides pure sound
Record audio up to 60 metes away with no obstacle
Real-time monitoring
Volume control wheel
Power provided by LR6/AA size alkaline battery Operating Frequencies:
Channel A Channel B Channel C Channel D
203.65MHz 207.75MHz 211.55MHz 215.35MHz
Transmitters:
Operating Frequencies: 203-216MHz
Modulation Frequency: Modulation
Signal to noise ratio: 70dB or more
Antenna: 1/8λ wire antenna
Voice delay: 12ms
Battery: LR6/AA size alkaline Battery (not included)
Battery Life: 5 hours
Audio input connector: none
Current Consumption: 150 mA
Dimensions: L100.5*W43*H35mm
Weight: 137g (4.8 oz) without battery
Receiver:
Operating Frequencies: 203-216MHz
Reception System: FM Superheterodyne
Reception Sensitivity: 2 µV for 30 dB S/N
Output Connector: 3.5 mm (1/8″) TRS
DC Input: 9V DC (center-positive)
Battery: LR6/AA size alkaline Battery (not included)
Current Consumption: 150 mA
Battery Life: 5 hours
Dimensions: 102 x 62.0 x 44.7
Antenna Length: 178mm
Weight: 80 g (2.8 oz) without battery