• Transmission Speed: USB 2.0 (480 Mbps)
• Power Mode: USB
• D/A & A/D Convertor: 24 bit when playback; 16 bit when recording
• Bandwidth: 20 kHz (at fs=48 kHz)
• Total Harmonic Distortion: < -90dB
• S/N Ratio: > 90dB
• Headphone Output Power: >95dB
• Frequency Response: 20Hz-20 kHz
• Data Transmission Interface: Mini USB Socket
• Headphone Output Interface: Ø3.5mm Stereo Socket
• System Compatibility: Windows 2000 / Windows XP
• Net Weight: 475g
| Brand |
|---|
Two Independent Channels
Two XLR Microphone Inputs
Two 3.5mm (TRS) Microphone Inputs
Two 1/4″ Guitar Inputs
Output switch for smartphone (TRRS) or Camera/Camcorder/Recorder (TRS)
3.5mm Headphone Output Jack for Monitoring
+48v Phantom Power Switch
Mono/Stereo Toggle Output Switch Frequency Response:20 Hz to 20 Khz (+/-0.5 dB)
THD:Less than 0.01% @ 1 kHz, -30 dBu input
SNR:80 dB @ 1 kHz, -30 dBu input
Input1:
1x XLR mic input
1 x 1/4″ (6.35mm) guitar input
1 x 1/8″ (3.5mm) input
Input2:
1 x XLR mic input
1 x 1/4″ (6.35mm) guitar input
1 x 1/8″ (3.5mm) input
Output:1 x 1/8″ (3.5mm) CAB LINE
Gain:+20 dB to Infinity
Phantom Power:48V power supplie
Power Requirements:9V alkaline or lithium battery
Dimensions:L 4.7″ x W 1.6″ x H 1.6″ (12 x 4 x 4 cm)
Weight:4.6 oz. (130g) (excluding battery)
Four switchable channels to keep you free from interference
Detachable and flexible antenna can be rotated 360 degrees acrdingly for best sound
The high-band VHF provides pure sound
Record audio up to 60 metes away with no obstacle
Real-time monitoring
Volume control wheel
LED indicator light indicates battery life
Power provided by LR6/AA size alkaline battery
Three optional transmitters: bodypack, handheld and XLR plug-on transmitter
Includes a belt-pack transmitter, camera mountable receiver and an omnidirectional lavalier microphoneOperating Frequencies:
Channel A Channel B Channel C Channel D
203.65MHz 207.75MHz 211.55MHz 215.35MHz
Transmitters:
Operating Frequencies: 203-216MHz
Modulation Frequency: Modulation
Signal to noise ratio: 70dB or more
Antenna: 1/8λ wire antenna
Voice delay: 12ms
Battery: LR6/AA size alkaline Battery (not included)
Battery Life: 5 hours
Audio input connector: mini XLR
Current Consumption: 150 mA
Dimensions: L102*W62*H44.7 mm
Weight: 80g (2.8 oz) without battery
Receiver:
Operating Frequencies: 203-216MHz
Reception System: FM Superheterodyne
Reception Sensitivity: 2 µV for 30 dB S/N
Output Connector: 3.5 mm (1/8″) TRS
DC Input: 9V DC (center-positive)
Battery: LR6/AA size alkaline Battery (not included)
Current Consumption: 150 mA
Battery Life: 5 hours
Dimensions: 102 x 62.0 x 44.7
Antenna Length: 178mm
Weight: 80 g (2.8 oz) without battery
• Output to both DSLR camera and smartphone
• 3.5mm TRS & TRRS output cables included
• Integrated shock mount
• Plug & Use Design
• Foam windscreen included
• Rugged alluminum alloy construction for main body Model :Vmic Mini
Type:14mm Unidirectional Condenser Microphone
Frequency Range :75Hz to 20kHz
Sensitivity:-35dB +/- 3dB (0dB=1V/Pa, at 1 KHz)
Maximum input S.P.L:f=1 kHz, THD<5% (105 dB)Output Impedance :200 ohmSignal to Noise Ratio:75 dB SPLPower :Plug-in powerDimensions:62 × 117 × 19mmWeight:69g (about 2.4oz)
Reliable, broadcast-quality audio
514 MHz – 596 MHz
96 selectable channels in 2 groups
Headphone monitoring
Easy-to-read LCD displays
Over 330-feet (100m) in open areas or 200-feet (60m) with obstacles
Optional body-pack and XLR transmitters for different applications Transmitter
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Frequency Range: 514 MHz – 596 MHz
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Signal to Noise Ratio: 70 dB or more
Spur Suppression: -60 dB
Voice Delay: 12 ms
Antenna: 1/4λ wire antenna
Audio input connector: TX9:3.5mm mini jack
HU9: noneTX-XLR9: XLR-3-11C type (female)
Reference audio input level: -60dBV (MIC input, 0dB attenuation)
Distortion: 0.5% or less
Weight: TX9: Approx. 211.4g (excluding batteries)
HU9: Approx. 338.2g (excluding batteries)
TX-XLR9: Approx. 138g (Excluding batteries)
Battery: Two AA size batteries
Dimensions: TX9: 170.9 x 63.5 x 30.0 mm
HU9: 254.0 x 52.0 x 52.0 mm
TX-XLR9: 105.5 x 43 x 34.7 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃
Receiver
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Audio output connector: 3.5mm mini jack
Antenna: 1/4λ wire antenna
Audio output level: -60dBV
Headphone output level: 30mW (16Ω)
Receiver frequencies: 514 MHz – 596 MHz
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Frequency response: 40Hz to 18kHz (+/-3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Weight: 218.7g (Excluding batteries)
Battery: Two AA size batteries
Dimensions: 170.9 x 63.5 x 30.0 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃
• Transducer Principle: Back Electret Condenser
• Directivity Characteristic: Cardioid
• Frequency Response: 50Hz-18kHz
• Sensitivity: -45dB±3dB (0dB=1V/Pa at 1kHz)
• Output Impedance: 1000Ω±30% (at 1kHz)
• Max. Input SPL: 136dB (THD ≤1.0％ at 1kHz)
• Power Requirements: 1.5V AA Battery
• Net Weight: 258g
Two pro-standard XLR terminals
Two real time audio level controls
LINE/MIC/48V PH switches
Three level gain controls (0dB, 10dB, 20dB)
Sandard cold shoe mount
Low cut switch (150Hz) Inputs:2x Balanced XLR inputs
Output:3.5mm TRS (for Cameras & Camcorders)
Power Requirements:9V Battery
Frequency Response：20 Hz to 20 kHz, +/-0.5 dB
SNR：80 dB @ 1 kHz, -30 dBu input
Dimensions (WxHxD)
XLR Adapter: 3.3 x 3.9 x 3.3″ (84 x 100 x 83mm)
Microphone: 1.7 x 7.4″ (43 x 187mm)
Weight：
XLR Adapter: 5.9 oz (167g)
Microphone: 2.1 oz (60g)
Inputs:
One 1/8″ (3.5 mm) Auxiliary Mini-Jack Input
Two balanced XLR inputs
Output:
One stereo 1/8″ (3.5 mm) Mini-Jack Output
Dual Trim Control Knobs:
Adjust the signal of each channel to the optimum recording level
Mono /Stereo Switch:
LINE / MIC Switch:
GND1/GND2 Ground switch eliminate ground hum and noise
No Powe or Battery is Needed Input Level:
MIC：-35 dBu
LINE：-10 – +4 dBu
Input Level:General Mic Levels
Frequency Response:10Hz to 100kHz (+/-1.5 dB)
Dimensions:87 (L) x 80(W) x 52(H) mm
Weight:191g (6.7oz.)
Cardioid broadcast sound quality
1400 mAh internal rechargeable lithium battery
Balanced output
+48V phantom power
High frequency boost button
High pass filter (150 Hz)
Signal to noise ratio:75 dB SPL (per IEC651)
-10 dB PAD button Acoustic Principle:Line gradient
Directional Pattern:Cardioid
Frequency Range:40 to 20k Hz (selectable HPF 150 Hz)
Sensitivity:-35±3dB(0dB=1V/Pa,at 1KHz) 1.5V 2.2kΩ
Output Impedance:200 ohm
Maximum Output:10 dBu (at 1 kHz, 1% THD into 1 kOhm)
Dynamic Range:119 dB (per IEC651)
Maximum SPL:135 dB
Signal to Noise Ratio:75 dB SPL (per IEC651)
Power:48V phantom power;
built-in lithium battery;
(battery life:150 hours)
Output Connection;
3-pin XLR
balanced output between Pin 2 (+)
Pin 3 (-) and Pin 1 (ground)
Dimensions:2.3 x 2.3 x 28.2 cm
Weight:171g (About 6 oz.)
Maximum SPL:135 dB
Two pro-standard XLR terminals
Two real time audio level controls
LINE/MIC/48V PH switches
There level gain controls (0dB, 10dB, 20dB)
Standard cold shoe mount
Low cut switch (150Hz)
LED Indicator input Connections: 2 x XLR balanced – Mic/Line
(included SR-NV5 microphone takes up 1 input, if used)
Output Connection: 1 x 1/8″ (3.5 mm) wired connector
Power Requirements: 9 V alkaline or lithium battery
Frequency Response: 20 Hz to 20 Khz, +/-0.5 dB
THD: Less than 0.01% @ 1 kHz, -30 dBu input
SNR: 80 dB @ 1 kHz, -30 dBu input
Dimensions: XLR adapter (WxHxD)
3.31’’ x 3.94’’ x 3.27″ (84 x 100 x 83 mm)
Weight: XLR adapter: 5.9 oz (167g)
2 Sherif Street, Downtown, Cairo, Egypt.
Family Mall, First District, Behind “Arafa Group”, 6 October City.
© All copyrights reserved. Developed by Swarms Agency
