• Element: Dynamic
• Polar Pattern: Uni-directional
• Frequency Response: 70Hz-12.5kHz
• Sensitivity: -54dB±3dB(0dB=1V/Pa at 1kHz)
• Output Impedance: 500Ω±30%(at 1kHz)
Additional information
Brand |
---|
Get free shipping for order over 500EGP
• Transducer Principle: Back Electret Condenser
• Directivity Characteristic: Cardioid
• Frequency Response: 50Hz-18kHz
• Sensitivity: -45dB±3dB (0dB=1V/Pa at 1kHz)
• Output Impedance: 1000Ω±30% (at 1kHz)
• Max. Input SPL: 136dB (THD ≤1.0% at 1kHz)
• Power Requirements: 1.5V AA Battery
• Net Weight: 258g
2,150 EGPAdd to cart
Cardioid broadcast sound quality
1400 mAh internal rechargeable lithium battery
Balanced output
+48V phantom power
High frequency boost button
High pass filter (150 Hz)
Signal to noise ratio:75 dB SPL (per IEC651)
-10 dB PAD button Acoustic Principle:Line gradient
Directional Pattern:Cardioid
Frequency Range:40 to 20k Hz (selectable HPF 150 Hz)
Sensitivity:-35±3dB(0dB=1V/Pa,at 1KHz) 1.5V 2.2kΩ
Output Impedance:200 ohm
Maximum Output:10 dBu (at 1 kHz, 1% THD into 1 kOhm)
Dynamic Range:119 dB (per IEC651)
Maximum SPL:135 dB
Signal to Noise Ratio:75 dB SPL (per IEC651)
Power:48V phantom power;
built-in lithium battery;
(battery life:150 hours)
Output Connection;
3-pin XLR
balanced output between Pin 2 (+)
Pin 3 (-) and Pin 1 (ground)
Dimensions:2.3 x 2.3 x 28.2 cm
Weight:171g (About 6 oz.)
Maximum SPL:135 dB
7,250 EGPAdd to cart
• Element: Back Electret Condenser
• Polar Pattern: Hyper-cardioid
• Frequency Response: 60Hz-16kHz
• Sensitivity: -36dB±3dB (0dB=1V/Pa at 1kHz)
• Bass Filter: 12dB/octave at 100Hz
• Output Impedance: 200Ω±30% (at 1kHz)
• Power Requirements: 9-52V Phantom Power
1,300 EGPAdd to cart
XLR connector
+48V phantom power
Records 24bit/48kHz wav audio
Easy-to-use menu and LCD display
Input audio control
Switchable low-cut filter
3.5mm headphone monitor output
Lightweight all-metal construction Recording Media:
micro SD card (64MB~2GB)
microSDHC card (4GB~32GB)
Recording/Playback Format:24/48kHz 16/24bit, mono/poly BWF
Recording/Playback Format:24/48kHz 16/24bit, mono/poly BWF
Input Connector:XLR jack (Female), 1GND;2HOT;3COLD
Mic Input Level:Selectable at -12dBu~+33dBu
Headphone Jack:1/8’’ (3.5mm)
Frequency Response:20Hz~22kHz +/-2dB
Distortion:0.05% (1kHz sine wave)
S/N ratio:92dB or higher
Battery Type:2x AA Battery (alkaline, NiMH or lithium)
Power Consumption:0.65W (Maximum)
Phantom Power:+48V
3,650 EGPAdd to cart
Inputs:
One 1/8″ (3.5 mm) Auxiliary Mini-Jack Input
Two balanced XLR inputs
Output:
One stereo 1/8″ (3.5 mm) Mini-Jack Output
Dual Trim Control Knobs:
Adjust the signal of each channel to the optimum recording level
Mono /Stereo Switch:
LINE / MIC Switch:
GND1/GND2 Ground switch eliminate ground hum and noise
No Powe or Battery is Needed Input Level:
MIC:-35 dBu
LINE:-10 – +4 dBu
Input Level:General Mic Levels
Frequency Response:10Hz to 100kHz (+/-1.5 dB)
Dimensions:87 (L) x 80(W) x 52(H) mm
Weight:191g (6.7oz.)
1,600 EGPAdd to cart
Reliable, broadcast-quality audio
514 MHz – 596 MHz
96 selectable channels in 2 groups
Headphone monitoring
Easy-to-read LCD displays
Over 330-feet (100m) in open areas or 200-feet (60m) with obstacles
Optional body-pack and XLR transmitters for different applications Transmitter
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Frequency Range: 514 MHz – 596 MHz
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Signal to Noise Ratio: 70 dB or more
Spur Suppression: -60 dB
Voice Delay: 12 ms
Antenna: 1/4λ wire antenna
Audio input connector: TX9:3.5mm mini jack
HU9: noneTX-XLR9: XLR-3-11C type (female)
Reference audio input level: -60dBV (MIC input, 0dB attenuation)
Distortion: 0.5% or less
Weight: TX9: Approx. 211.4g (excluding batteries)
HU9: Approx. 338.2g (excluding batteries)
TX-XLR9: Approx. 138g (Excluding batteries)
Battery: Two AA size batteries
Dimensions: TX9: 170.9 x 63.5 x 30.0 mm
HU9: 254.0 x 52.0 x 52.0 mm
TX-XLR9: 105.5 x 43 x 34.7 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃
Receiver
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Audio output connector: 3.5mm mini jack
Antenna: 1/4λ wire antenna
Audio output level: -60dBV
Headphone output level: 30mW (16Ω)
Receiver frequencies: 514 MHz – 596 MHz
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Frequency response: 40Hz to 18kHz (+/-3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Weight: 218.7g (Excluding batteries)
Battery: Two AA size batteries
Dimensions: 170.9 x 63.5 x 30.0 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃
9,000 EGPAdd to cart
Two pro-standard XLR terminals
Two real time audio level controls
LINE/MIC/48V PH switches
Three level gain controls (0dB, 10dB, 20dB)
Sandard cold shoe mount
Low cut switch (150Hz) Inputs:2x Balanced XLR inputs
Output:3.5mm TRS (for Cameras & Camcorders)
Power Requirements:9V Battery
Frequency Response:20 Hz to 20 kHz, +/-0.5 dB
SNR:80 dB @ 1 kHz, -30 dBu input
Dimensions (WxHxD)
XLR Adapter: 3.3 x 3.9 x 3.3″ (84 x 100 x 83mm)
Microphone: 1.7 x 7.4″ (43 x 187mm)
Weight:
XLR Adapter: 5.9 oz (167g)
Microphone: 2.1 oz (60g)
7,000 EGPAdd to cart
Reliable, broadcast-quality audio
514 MHz – 596 MHz
96 selectable channels in 2 groups
Headphone monitoring
Easy-to-read LCD displays
Over 330-feet (100m) in open areas or 200-feet (60m) with obstacles
Optional body-pack and XLR transmitters for different applications Transmitter
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Frequency Range: 514 MHz – 596 MHz
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Signal to Noise Ratio: 70 dB or more
Spur Suppression: -60 dB
Voice Delay: 12 ms
Antenna: 1/4λ wire antenna
Audio input connector: TX9:3.5mm mini jack
HU9: noneTX-XLR9: XLR-3-11C type (female)
Reference audio input level: -60dBV (MIC input, 0dB attenuation)
Distortion: 0.5% or less
Weight: TX9: Approx. 211.4g (excluding batteries)
HU9: Approx. 338.2g (excluding batteries)
TX-XLR9: Approx. 138g (Excluding batteries)
Battery: Two AA size batteries
Dimensions: TX9: 170.9 x 63.5 x 30.0 mm
HU9: 254.0 x 52.0 x 52.0 mm
TX-XLR9: 105.5 x 43 x 34.7 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃
Receiver
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Audio output connector: 3.5mm mini jack
Antenna: 1/4λ wire antenna
Audio output level: -60dBV
Headphone output level: 30mW (16Ω)
Receiver frequencies: 514 MHz – 596 MHz
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Frequency response: 40Hz to 18kHz (+/-3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Weight: 218.7g (Excluding batteries)
Battery: Two AA size batteries
Dimensions: 170.9 x 63.5 x 30.0 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃
13,200 EGPAdd to cart
Directional 90° mic capsule
Integrated shock-mount
Limits Background Noise
Foam Windscreen Included Type:Condenser microphones
Connector:TRRS (3.5mm jack) for iOS and Mac
Frequency Response:35 Hz to 18 kHz
Signal to Noise Ratio:74dB SPL
Dimensions:2.8 x 0.6 x 0.5 inches
Weight:21g (0.74oz)
Directional condenser microphone
An extra 3.5mm mic input
Headphone monitor jack
Integrated shoe-mount
Low cut filter (200 Hz)
3.5mm audio output to camera
Foam windscreen included
Lightweight construction
+10dB audio level switch Microphone Type :Directional Condenser
Frequency Range:75 Hz – 18 kHz
Sensitivity:-37dB +/- 1dB
Signal to Noise Ratio:75dB SPL
Battery:1 “AAA”
Output:3.5mm TRS
Dimensions:5.5 x 2.3 x 1.6″ (14 x 5.8 x 4.1cm)
Weight:2.1 oz (30g)
1,500 EGPAdd to cart
© All copyrights reserved. Developed by Swarms Agency