• Transducer Principle: Dynamic
• Driver Diameter: Ø50mm
• Impedance: 60Ω
• Sensitivity: 102dB
• Frequency Response: 20Hz-20kHz
• Power Handling Capability: 1500mW
• Cable: Ø4mm x 1.2m Spring Cable (full stretch length approx. 4m)
• Adaptor Plug: Stereo Ø3.5mm + Ø6.3mm
• Net Weight: 390g
| Brand |
|---|
• Transducer Principle: Back Electret Condenser
• Directivity Characteristic: Hyper-cardioid
• Frequency Response: 40Hz-16kHz
• Sensitivity: -36dB±3dB (0dB=1V/Pa at 1kHz)
• Output Impedance: 100Ω±30% (at 1kHz)
• Equivalent Noise Level: ≤26dB A (IEC 581-5)
• Max. Input SPL: 130dB (THD ≤1.0％ at 1kHz)
• Bass Filter: 10dB/octave at 80Hz
• Power Requirements: 9-52V DC Phantom Power
• Element: Back Electret Condenser
• Polar Pattern: Hyper-cardioid
• Frequency Response: 60Hz-16kHz
• Sensitivity: -36dB±3dB (0dB=1V/Pa at 1kHz)
• Bass Filter: 12dB/octave at 100Hz
• Output Impedance: 200Ω±30% (at 1kHz)
• Power Requirements: 9-52V Phantom Power
XLR connector
+48V phantom power
Records 24bit/48kHz wav audio
Easy-to-use menu and LCD display
Input audio control
Switchable low-cut filter
3.5mm headphone monitor output
Lightweight all-metal construction Recording Media:
micro SD card (64MB~2GB)
microSDHC card (4GB~32GB)
Recording/Playback Format:24/48kHz 16/24bit, mono/poly BWF
Recording/Playback Format:24/48kHz 16/24bit, mono/poly BWF
Input Connector:XLR jack (Female), 1GND;2HOT;3COLD
Mic Input Level:Selectable at -12dBu~+33dBu
Headphone Jack:1/8’’ (3.5mm)
Frequency Response:20Hz~22kHz +/-2dB
Distortion:0.05% (1kHz sine wave)
S/N ratio:92dB or higher
Battery Type:2x AA Battery (alkaline, NiMH or lithium)
Power Consumption:0.65W (Maximum)
Phantom Power:+48V
Two Independent Channels
Two XLR Microphone Inputs
Two 3.5mm (TRS) Microphone Inputs
Two 1/4″ Guitar Inputs
Output switch for smartphone (TRRS) or Camera/Camcorder/Recorder (TRS)
3.5mm Headphone Output Jack for Monitoring
+48v Phantom Power Switch
Mono/Stereo Toggle Output Switch Frequency Response:20 Hz to 20 Khz (+/-0.5 dB)
THD:Less than 0.01% @ 1 kHz, -30 dBu input
SNR:80 dB @ 1 kHz, -30 dBu input
Input1:
1x XLR mic input
1 x 1/4″ (6.35mm) guitar input
1 x 1/8″ (3.5mm) input
Input2:
1 x XLR mic input
1 x 1/4″ (6.35mm) guitar input
1 x 1/8″ (3.5mm) input
Output:1 x 1/8″ (3.5mm) CAB LINE
Gain:+20 dB to Infinity
Phantom Power:48V power supplie
Power Requirements:9V alkaline or lithium battery
Dimensions:L 4.7″ x W 1.6″ x H 1.6″ (12 x 4 x 4 cm)
Weight:4.6 oz. (130g) (excluding battery)
• Transducer Principle: Back Electret Condenser
• Directivity Characteristic: Cardioid, stereo
• Frequency Response: 30Hz-16KHz
• Sensitivity: -44dB±3dB(0dB=1V/Pa at 1KHz)
• Max. Input SPL: 130dB(THD≤1.0% at 1KHz)
• Low Frequency Attenuation: 80Hz 10dB/octave
• Output Impedance: ≤200Ω
• Power Requirement: CR2032 3V button battery
• Net Weight: 115g
Reliable, broadcast-quality audio
514 MHz – 596 MHz
96 selectable channels in 2 groups
Headphone monitoring
Easy-to-read LCD displays
Over 330-feet (100m) in open areas or 200-feet (60m) with obstacles
Optional body-pack and XLR transmitters for different applications Transmitter
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Frequency Range: 514 MHz – 596 MHz
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Signal to Noise Ratio: 70 dB or more
Spur Suppression: -60 dB
Voice Delay: 12 ms
Antenna: 1/4λ wire antenna
Audio input connector: TX9:3.5mm mini jack
HU9: noneTX-XLR9: XLR-3-11C type (female)
Reference audio input level: -60dBV (MIC input, 0dB attenuation)
Distortion: 0.5% or less
Weight: TX9: Approx. 211.4g (excluding batteries)
HU9: Approx. 338.2g (excluding batteries)
TX-XLR9: Approx. 138g (Excluding batteries)
Battery: Two AA size batteries
Dimensions: TX9: 170.9 x 63.5 x 30.0 mm
HU9: 254.0 x 52.0 x 52.0 mm
TX-XLR9: 105.5 x 43 x 34.7 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃
Receiver
Channels: 96
Groups: A or B
Oscillator Type: PLL Synthesizer
Audio output connector: 3.5mm mini jack
Antenna: 1/4λ wire antenna
Audio output level: -60dBV
Headphone output level: 30mW (16Ω)
Receiver frequencies: 514 MHz – 596 MHz
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60dBV, 1kHz input)
Frequency response: 40Hz to 18kHz (+/-3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Weight: 218.7g (Excluding batteries)
Battery: Two AA size batteries
Dimensions: 170.9 x 63.5 x 30.0 mm
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +55℃
Two pro-standard XLR terminals
Two real time audio level controls
LINE/MIC/48V PH switches
There level gain controls (0dB, 10dB, 20dB)
Standard cold shoe mount
Low cut switch (150Hz)
LED Indicator input Connections: 2 x XLR balanced – Mic/Line
(included SR-NV5 microphone takes up 1 input, if used)
Output Connection: 1 x 1/8″ (3.5 mm) wired connector
Power Requirements: 9 V alkaline or lithium battery
Frequency Response: 20 Hz to 20 Khz, +/-0.5 dB
THD: Less than 0.01% @ 1 kHz, -30 dBu input
SNR: 80 dB @ 1 kHz, -30 dBu input
Dimensions: XLR adapter (WxHxD)
3.31’’ x 3.94’’ x 3.27″ (84 x 100 x 83 mm)
Weight: XLR adapter: 5.9 oz (167g)
Improves audio quality of smart phone
Two 1/8’’ (3.5mm) stereo mic/line inputs
One mini XLR microphone input (a mini-XLR to standard-XLR cable included)
+48V phantom power
One 1/8’’ (3.5mm) stereo line output to phone
One 1/8’’ (3.5mm) headphone monitor output
PLAY/REC monitor switch
Independent L/R level meters
Volume control knob
Includes two plug-in power condenser microphones
Includes a device holder and aluminum hand grip
Power provided by 9V battery Frequency Response: 20 Hz to 20 Khz, +/-0.5 dB
SNR: 82 dB @ 1 kHz, -30 dBu input
Distortion: Less than 0.03% @ 1 kHz, -30 dBu input
INPUT 1 GAIN: 15 dB
INPUT 2 GAIN & MINI XLR Jack: 15 dB
INPUT 1 & INPUT 2 Power: 5V power supplies
MINI Jack Phantom Power: 48V power supplies
VU Meter: -18 dB to +3 dB in 3 dB increments
Power Requirements: 9V alkaline or lithium battery
Dimensions: L 95 x W35 x H298 mm
Weight: 0.74 kg (26.1 oz.)
Two 1/8″ (3.5 mm) mono inputs One stereo input
Two XLR Inputs
One 1/8 (3.5 mm) stereo output
Mono/Stereo switch (M/S)
Left and Right Channel Control Knobs
Independent phantom power control for inputs. INPUT 1: 5V/OFF/3V; INPUT 2: 48V/OFF
LINE/MIC/PH switch
Level Meter Indicates the sound level in dB for each channel
Headphone jack to monitor the audio from microphones Frequency Response:20 Hz to 20 Khz, +/-0.5 dB
THD:Less than 0.01% @ 1 kHz, -30 dBu input
SNR:80 dB @ 1 kHz, -30 dBu input
INPUT1 GAIN:
LINE: 0 dB
MIC/PH: 20dB
INPUT2 GAIN
LINE: 0 dB
MIC/PH: 20dB
INPUT 1 Phantom Power:5V/3V power supplies
INPUT 2 Phantom Power:48V power supplies
Level Meter:-18 dB to +3 dB in 3 dB increments
Power Requirements:9 V alkaline or lithium battery
Battery Duration:
5 hours typical lithium battery (no phantom)
3 hour typical lithium battery (with phantom)
Dimensions:
(L x W x H) 136 mm x 80.5 mm x 62.5 mm
Weight:13.5 oz (0.385 kg)
2 Sherif Street, Downtown, Cairo, Egypt.
Family Mall, First District, Behind “Arafa Group”, 6 October City.
© All copyrights reserved. Developed by Swarms Agency
