Additional information
Brand |
---|
Get free shipping for order over 500EGP
• Element: Back Electret Condenser
• Polar Pattern: Hyper-cardioid
• Frequency Response: 60Hz-16kHz
• Sensitivity: -36dB±3dB (0dB=1V/Pa at 1kHz)
• Bass Filter: 12dB/octave at 100Hz
• Output Impedance: 200Ω±30% (at 1kHz)
• Power Requirements: 9-52V Phantom Power
1,300 EGPAdd to cart
• Transducer Principle: Back Electret Condenser
• Directivity Characteristic: Cardioid
• Frequency Response: 50Hz-18kHz
• Sensitivity: -45dB±3dB (0dB=1V/Pa at 1kHz)
• Output Impedance: 1000Ω±30% (at 1kHz)
• Max. Input SPL: 136dB (THD ≤1.0% at 1kHz)
• Power Requirements: 1.5V AA Battery
• Net Weight: 258g
2,150 EGPAdd to cart
• Transducer Principle: Back Electret Condenser
• Directivity Characteristic: Hyper-cardioid
• Frequency Response: 40Hz-16kHz
• Sensitivity: -36dB±3dB (0dB=1V/Pa at 1kHz)
• Output Impedance: 100Ω±30% (at 1kHz)
• Equivalent Noise Level: ≤26dB A (IEC 581-5)
• Max. Input SPL: 130dB (THD ≤1.0% at 1kHz)
• Bass Filter: 10dB/octave at 80Hz
• Power Requirements: 9-52V DC Phantom Power
1,450 EGPAdd to cart
Improves audio quality of smart phone
Two 1/8’’ (3.5mm) stereo mic/line inputs
One mini XLR microphone input (a mini-XLR to standard-XLR cable included)
+48V phantom power
One 1/8’’ (3.5mm) stereo line output to phone
One 1/8’’ (3.5mm) headphone monitor output
PLAY/REC monitor switch
Independent L/R level meters
Volume control knob
Includes two plug-in power condenser microphones
Includes a device holder and aluminum hand grip
Power provided by 9V battery Frequency Response: 20 Hz to 20 Khz, +/-0.5 dB
SNR: 82 dB @ 1 kHz, -30 dBu input
Distortion: Less than 0.03% @ 1 kHz, -30 dBu input
INPUT 1 GAIN: 15 dB
INPUT 2 GAIN & MINI XLR Jack: 15 dB
INPUT 1 & INPUT 2 Power: 5V power supplies
MINI Jack Phantom Power: 48V power supplies
VU Meter: -18 dB to +3 dB in 3 dB increments
Power Requirements: 9V alkaline or lithium battery
Dimensions: L 95 x W35 x H298 mm
Weight: 0.74 kg (26.1 oz.)
3,000 EGPAdd to cart
Inputs:
One 1/8″ (3.5 mm) Auxiliary Mini-Jack Input
Two balanced XLR inputs
Output:
One stereo 1/8″ (3.5 mm) Mini-Jack Output
Dual Trim Control Knobs:
Adjust the signal of each channel to the optimum recording level
Mono /Stereo Switch:
LINE / MIC Switch:
GND1/GND2 Ground switch eliminate ground hum and noise
No Powe or Battery is Needed Input Level:
MIC:-35 dBu
LINE:-10 – +4 dBu
Input Level:General Mic Levels
Frequency Response:10Hz to 100kHz (+/-1.5 dB)
Dimensions:87 (L) x 80(W) x 52(H) mm
Weight:191g (6.7oz.)
1,600 EGPAdd to cart
Cardioid broadcast sound quality
1400 mAh internal rechargeable lithium battery
Balanced output
+48V phantom power
High frequency boost button
High pass filter (150 Hz)
Signal to noise ratio:75 dB SPL (per IEC651)
-10 dB PAD button Acoustic Principle:Line gradient
Directional Pattern:Cardioid
Frequency Range:40 to 20k Hz (selectable HPF 150 Hz)
Sensitivity:-35±3dB(0dB=1V/Pa,at 1KHz) 1.5V 2.2kΩ
Output Impedance:200 ohm
Maximum Output:10 dBu (at 1 kHz, 1% THD into 1 kOhm)
Dynamic Range:119 dB (per IEC651)
Maximum SPL:135 dB
Signal to Noise Ratio:75 dB SPL (per IEC651)
Power:48V phantom power;
built-in lithium battery;
(battery life:150 hours)
Output Connection;
3-pin XLR
balanced output between Pin 2 (+)
Pin 3 (-) and Pin 1 (ground)
Dimensions:2.3 x 2.3 x 28.2 cm
Weight:171g (About 6 oz.)
Maximum SPL:135 dB
7,250 EGPAdd to cart
Directional condenser microphone
An extra 3.5mm mic input
Headphone monitor jack
Integrated shoe-mount
Low cut filter (200 Hz)
3.5mm audio output to camera
Foam windscreen included
Lightweight construction
+10dB audio level switch Microphone Type :Directional Condenser
Frequency Range:75 Hz – 18 kHz
Sensitivity:-37dB +/- 1dB
Signal to Noise Ratio:75dB SPL
Battery:1 “AAA”
Output:3.5mm TRS
Dimensions:5.5 x 2.3 x 1.6″ (14 x 5.8 x 4.1cm)
Weight:2.1 oz (30g)
1,500 EGPAdd to cart
• Transducer Principle: Back Electret Condenser
• Directivity Characteristic: Cardioid, stereo
• Frequency Response: 30Hz-16KHz
• Sensitivity: -44dB±3dB(0dB=1V/Pa at 1KHz)
• Max. Input SPL: 130dB(THD≤1.0% at 1KHz)
• Low Frequency Attenuation: 80Hz 10dB/octave
• Output Impedance: ≤200Ω
• Power Requirement: CR2032 3V button battery
• Net Weight: 115g
1,500 EGPAdd to cart
XLR connector
+48V phantom power
Records 24bit/48kHz wav audio
Easy-to-use menu and LCD display
Input audio control
Switchable low-cut filter
3.5mm headphone monitor output
Lightweight all-metal construction Recording Media:
micro SD card (64MB~2GB)
microSDHC card (4GB~32GB)
Recording/Playback Format:24/48kHz 16/24bit, mono/poly BWF
Recording/Playback Format:24/48kHz 16/24bit, mono/poly BWF
Input Connector:XLR jack (Female), 1GND;2HOT;3COLD
Mic Input Level:Selectable at -12dBu~+33dBu
Headphone Jack:1/8’’ (3.5mm)
Frequency Response:20Hz~22kHz +/-2dB
Distortion:0.05% (1kHz sine wave)
S/N ratio:92dB or higher
Battery Type:2x AA Battery (alkaline, NiMH or lithium)
Power Consumption:0.65W (Maximum)
Phantom Power:+48V
3,650 EGPAdd to cart
3,600 EGPAdd to cart
© All copyrights reserved. Developed by Swarms Agency