SARAMONIC SMART MIC

Inputs:
One 1/8″ (3.5 mm) Auxiliary Mini-Jack Input
Two balanced XLR inputs
Output:
One stereo 1/8″ (3.5 mm) Mini-Jack Output
Dual Trim Control Knobs:
Adjust the signal of each channel to the optimum recording level
Mono /Stereo Switch:
LINE / MIC Switch:
GND1/GND2 Ground switch eliminate ground hum and noise
No Powe or Battery is Needed Input Level:
MIC：-35 dBu

LINE：-10 – +4 dBu

Input Level:General Mic Levels

Frequency Response:10Hz to 100kHz (+/-1.5 dB)

Dimensions:87 (L) x 80(W) x 52(H) mm

Weight:191g (6.7oz.)

XLR connector
+48V phantom power
Records 24bit/48kHz wav audio
Easy-to-use menu and LCD display
Input audio control
Switchable low-cut filter
3.5mm headphone monitor output
Lightweight all-metal construction Recording Media:

micro SD card (64MB~2GB)

microSDHC card (4GB~32GB)

Recording/Playback Format:24/48kHz 16/24bit, mono/poly BWF

Recording/Playback Format:24/48kHz 16/24bit, mono/poly BWF

Input Connector:XLR jack (Female), 1GND;2HOT;3COLD

Mic Input Level:Selectable at -12dBu~+33dBu

Headphone Jack:1/8’’ (3.5mm)

Frequency Response:20Hz~22kHz +/-2dB

Distortion:0.05% (1kHz sine wave)

S/N ratio:92dB or higher

Battery Type:2x AA Battery (alkaline, NiMH or lithium)

Power Consumption:0.65W (Maximum)

Phantom Power:+48V

• Output to both DSLR camera and smartphone
• 3.5mm TRS & TRRS output cables included
• Integrated shock mount
• Plug & Use Design
• Foam windscreen included
• Rugged alluminum alloy construction for main body Model :Vmic Mini

Type:14mm Unidirectional Condenser Microphone

Frequency Range :75Hz to 20kHz

Sensitivity:-35dB +/- 3dB (0dB=1V/Pa, at 1 KHz)

Maximum input S.P.L:f=1 kHz, THD<5% (105 dB)Output Impedance :200 ohmSignal to Noise Ratio:75 dB SPLPower :Plug-in powerDimensions:62 × 117 × 19mmWeight:69g (about 2.4oz)

Improves audio quality of smart phone
Two 1/8’’ (3.5mm) stereo mic/line inputs
One mini XLR microphone input (a mini-XLR to standard-XLR cable included)
+48V phantom power
One 1/8’’ (3.5mm) stereo line output to phone
One 1/8’’ (3.5mm) headphone monitor output
PLAY/REC monitor switch
Independent L/R level meters
Volume control knob
Includes two plug-in power condenser microphones
Includes a device holder and aluminum hand grip
Power provided by 9V battery Frequency Response: 20 Hz to 20 Khz, +/-0.5 dB
SNR: 82 dB @ 1 kHz, -30 dBu input

Distortion: Less than 0.03% @ 1 kHz, -30 dBu input

INPUT 1 GAIN: 15 dB

INPUT 2 GAIN & MINI XLR Jack: 15 dB

INPUT 1 & INPUT 2 Power: 5V power supplies

MINI Jack Phantom Power: 48V power supplies

VU Meter: -18 dB to +3 dB in 3 dB increments

Power Requirements: 9V alkaline or lithium battery

Dimensions: L 95 x W35 x H298 mm

Weight: 0.74 kg (26.1 oz.)

One stereo 1/8 (3.5 mm) Mini-Jack Input
Two mono 1/8 (3.5 mm) Mini-Jack Inputs
One stereo 1/8 (3.5 mm) Mini-Jack Output
Adjust the signal to each channel to set your optimum recording levels
Mono or stereo output mode
Attach a variety of microphonesor wireless receivers Frequency Response:20 Hz to 20 Khz (+/-0.5 dB)

Input Level:MIC setting: -35 dBu minimum

Gain:Unity

Dimensions:L 76.0 x W 59.5 x H 55.0 mm

Weight:153g ( 5.4 oz. )

Stereo lavalier microphone for DSLR camera, camcorder,smartphone and recorder
Improved sensitivity and signal to noise
3.5mm audio output
5m cable length
Powered by one CR1130 battery (included)
Foam windscreen is included Type: Condenser microphone
Polar Pattern: Cardioid

Frequency Range: 50Hz to 18KHz

Sensitivity: -32±3dB (0dB=1V/Pa,at 1KHz)

Signal to Noise Ratio: >75 dB SPL

Battery Type: One LR44 battery

Cable: 5m/16.5 ft

Weight: 58g

Output: 3.5mm audio output