Nic Mic 2×1 CVM-D02 6m

XLR connector
+48V phantom power
Records 24bit/48kHz wav audio
Easy-to-use menu and LCD display
Input audio control
Switchable low-cut filter
3.5mm headphone monitor output
Lightweight all-metal construction Recording Media:

micro SD card (64MB~2GB)

microSDHC card (4GB~32GB)

Recording/Playback Format:24/48kHz 16/24bit, mono/poly BWF

Recording/Playback Format:24/48kHz 16/24bit, mono/poly BWF

Input Connector:XLR jack (Female), 1GND;2HOT;3COLD

Mic Input Level:Selectable at -12dBu~+33dBu

Headphone Jack:1/8’’ (3.5mm)

Frequency Response:20Hz~22kHz +/-2dB

Distortion:0.05% (1kHz sine wave)

S/N ratio:92dB or higher

Battery Type:2x AA Battery (alkaline, NiMH or lithium)

Power Consumption:0.65W (Maximum)

Phantom Power:+48V

Cardioid broadcast sound quality
1400 mAh internal rechargeable lithium battery
Balanced output
+48V phantom power
High frequency boost button
High pass filter (150 Hz)
Signal to noise ratio:75 dB SPL (per IEC651)
-10 dB PAD button Acoustic Principle:Line gradient
Directional Pattern:Cardioid

Frequency Range:40 to 20k Hz (selectable HPF 150 Hz)

Sensitivity:-35±3dB(0dB=1V/Pa,at 1KHz) 1.5V 2.2kΩ

Output Impedance:200 ohm

Maximum Output:10 dBu (at 1 kHz, 1% THD into 1 kOhm)

Dynamic Range:119 dB (per IEC651)

Maximum SPL:135 dB

Signal to Noise Ratio:75 dB SPL (per IEC651)

Power:48V phantom power;

built-in lithium battery;

(battery life:150 hours)

Output Connection;

3-pin XLR

balanced output between Pin 2 (+)

Pin 3 (-) and Pin 1 (ground)

Dimensions:2.3 x 2.3 x 28.2 cm

Weight:171g (About 6 oz.)

Maximum SPL:135 dB

Directional 90° mic capsule
Integrated shock-mount
Limits Background Noise
Foam Windscreen Included Type:Condenser microphones

Connector:TRRS (3.5mm jack) for iOS and Mac

Frequency Response:35 Hz to 18 kHz

Signal to Noise Ratio:74dB SPL

Dimensions:2.8 x 0.6 x 0.5 inches

Weight:21g (0.74oz)

Optimised frequency response
Extreme low handling and wind noise
Excellent sound quality
Cardioid dynamic capsule
Rugged all-metal body Pick-up pattern:cardioid

Frequency Response:100Hz~10KHz

Sensitivity:0°~-52.4dB±3dB (0dB=1V/ubar at 1KHz)

Output Impedance:500Ω±30% at 1 KHz

Connector:3-pin XLR Connector

Dimensions:ø51 mm,length 258mm/approx.320g

Inputs:
One 1/8″ (3.5 mm) Auxiliary Mini-Jack Input
Two balanced XLR inputs
Output:
One stereo 1/8″ (3.5 mm) Mini-Jack Output
Dual Trim Control Knobs:
Adjust the signal of each channel to the optimum recording level
Mono /Stereo Switch:
LINE / MIC Switch:
GND1/GND2 Ground switch eliminate ground hum and noise
No Powe or Battery is Needed Input Level:
MIC：-35 dBu

LINE：-10 – +4 dBu

Input Level:General Mic Levels

Frequency Response:10Hz to 100kHz (+/-1.5 dB)

Dimensions:87 (L) x 80(W) x 52(H) mm

Weight:191g (6.7oz.)

　Two pro-standard XLR terminals
　Two real time audio level controls
　LINE/MIC/48V PH switches
　Three level gain controls (0dB, 10dB, 20dB)
　Sandard cold shoe mount
　Low cut switch (150Hz) Inputs:2x Balanced XLR inputs
Output:3.5mm TRS (for Cameras & Camcorders)

Power Requirements:9V Battery

Frequency Response：20 Hz to 20 kHz, +/-0.5 dB

SNR：80 dB @ 1 kHz, -30 dBu input

Dimensions (WxHxD)

XLR Adapter: 3.3 x 3.9 x 3.3″ (84 x 100 x 83mm)

Microphone: 1.7 x 7.4″ (43 x 187mm)

Weight：

XLR Adapter: 5.9 oz (167g)

Microphone: 2.1 oz (60g)